tightening the bolts usually exacerbates the problem. the soft mounts are
fragile, sometimes you need to reinstall them two or three times to get
them right, the o-rings get pinched, too much spring tension cracks the
plastic mounts, etc. etc. They're not an ideal product, but they are the
best I've been able to find. Once you get them to work you should never
take them apart if you can help it. I leave mine attached to the manifold
and remove the entire assembly.
-----Original Message-----
From: John Price
To: FOT
Sent: 2/25/2002 8:28 AM
Subject: Fuel Leaks
I am having a persistent problem with fuel leaking from the bottom of
the soft
mounts on my Webers. It is not the same carb twice, and tightening the
bolts
doesn't seem to help. Any suggestions?
John Price
|