To: | Friends of Triumph <fot@autox.team.net> |
---|---|
Subject: | Fuel Pressure Regulators |
From: | Joe Curry <spitlist@gte.net> |
Date: | Wed, 17 May 2000 08:18:39 -0700 |
I want to thank the following people who replied to my question about regulators: John Lye John Frymark Jack Drews Baxter Culver Jim Hill The consensus of opinion is that the lower pressure (1-4 psi) regulator is the one to have for Webers. Plus apparently one needs a much greater supply pressure for the regulator to work properly. All those who responded indicate that theirs are running at 3 to 3.5 psi and operate well in that range. Thanks again to all who responded! Regards, Joe |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: Fuel Regulator, Jim Hill |
---|---|
Next by Date: | TR3 fiberglass panels on eBay, Susan Hensley |
Previous by Thread: | Center (centre) main cap, Catpusher |
Next by Thread: | TR3 fiberglass panels on eBay, Susan Hensley |
Indexes: | [Date] [Thread] [Top] [All Lists] |