Joe Curry wrote
> . . .I need to ask . . . the fuel pressure
>requirements of twin 40 DCOE Webers.
>It seems that I have basically two choices
>which appear to be 1-4 psi and 4-9 psi
>regulators. Which of these two adequately
>cover the required range for this setup?
And John Frymark wrote:
> . . . with my 45DCOEs (TR4A) . . . I reset to
>3 lbs at Kas' recommendation. Holley has a low
>pressure regulator that adjusts from
>1-4 lbs that should be the right choice.
I use a Holley pressure regulator set to 3 1/2 psi on my TR6 - seems to be
more than adequate. Holley sells several regulators, including one with the
1-4psi range you mentioned. The Jegs catalog lists other adjustable
regulators, including 3-50 psi (Mallory 4309) and 3-25 psi (Russell).
Jim Hill
Madison WI
|