Scott,
Many thanks for your generous offer of the water pump pulley. This
mornintg I went begging around here some more and came up with one. When I
pulled my old pulley off, I found the cause for all the noise and rattling.
The pulley rides very close to the housing and apparently some wear in the
bearings permitted the pulley to chafe against the housing. Of course this
was after I had taken the radiator out, removed the vibration dampener et
al. What I need now is a large diameter 3/8" generator pulley. I'm now only
a little bit further behind than I was when I started this morning.
Again, thanks for your offer. Your generousity was very thoughtful.
Richard Taylor, TR-4
Atlanta
At 08:00 AM 9/11/98 -0500, Barr, Scott wrote:
>Richard,
>
>If you haven't found an alternative yet, I have a GT6 water pump pulley
>from a 71 that you could have. It's a couple hours away, but for
>another person circling the track with heater in tow, I'd be happy to
>make the run. If you need the piece, let me know and send me your
>address, cover shipping and we'll call it square.
>
>I suppose I should introduce myself to the list since I've been lurking
>out here for awhile.
>My name is Scott Barr. I have a 72 GT6 which I use as a daily driver
>and with which I've recently taken a drivers school and done a little
>time trialing. I'm hoping to work hard at the time trialing thing for a
>couple of years and then move to wheel to wheel when I can (a) afford it
>and (b) not kill anyone. I live in Appleton, Wisconsin, I'm 35 and my
>co-workers think I'm strangely obsessed with my car. But then again,
>their driving experience is limited to automotive appliances. When I'm
>not driving, fixing or obsessing about my car, I swim, bike and run, go
>rock-climbing, read and occasionally work. Anything else anyone would
>like to know?
>
>Scott Barr
>scott.barr@mccarty-law.com
>72 GT6
>
>> -----Original Message-----
>> From: Richard Taylor [SMTP:n196x@mindspring.com]
>> Sent: Thursday, September 10, 1998 5:29 PM
>> To: fot@autox.team.net
>> Subject: The Final Stretch
>>
>> Amici,
>> There are two more weekends before the HSR Classic @ Road Atlanta and
>> I
>> have my rebuilt engine back in the car and RUNNING! As far I know,
>> nobody's ever been this far ahead ever before a race. At least it's
>> never
>> been heard of by any of the cronies I hang out with.
>> But, naturally, there are a couple of worries with which I need a
>> little
>> help. The first has to do with the old pulley syndrom. I put the old
>> fat
>> one back on and it flails about and rattles disconcertedly(is that a
>> word?). Whatever it is it just ain't right for my new tight fresh
>> motor. I
>> understand that the quick fix is to get a GT-6 water pump pulley and
>> an MGB
>> vibration dampener and modify things from there. The problem is that
>> I
>> can't find the GT-^ thing. Any ideas? Alternatives?
>> The other concern is that I will be pulling probably 30 more HP than
>> the
>> old motor which ran fine with the standard radiator. It just looks
>> like
>> I'm headed into the dreaded arena of cooling deficiencies. I added an
>> oil
>> cooler but is that going to be enough? Since my car is streetable, I
>> still
>> have a heater (go ahead you real racers...laugh!) I guess I can use it
>> to
>> augment the cooling. I wonder if it can count for enough BTUs to make
>> a
>> difference. Whatch you'll think? With two weeks to worry about things,
>> I
>> should be able to address these two items con gusto.
>> Thanks for your views.
>> Richard Taylor, TR-4
>> Atlanta
>
|