IIRC,
the 2000 has a slip joint in the shaft.
Are the u-joint "timed-aligned" correctly.
The "crosses" must be in the same location.
Phil
Hey gang,
was planning on putting the engine in this weekend in the '68 2000 but then
realized I'm missing a some parts. If you remember, I got this car in parts
and just figured out a the vital missing pieces now.
I need:
The plate that is between the engine and tranny (I have 3 for a 240z, sure
wish those were interchangable)
Also the fork, throwout bearing and sleeve, everything but the slave itself.
Anyone?
thanks
Bill Oakes
Libertyville, IL
------------------------------
Message: 4
Date: Wed, 01 Sep 2010 11:41:24 -0400
From: Mark <mantolik@oh.rr.com>
Subject: [Roadsters] Vibration
To: datsun-roadsters@autox.team.net
Message-ID: <4C7E7424.4060405@oh.rr.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I had the engine trans out of my 70 SRL and noticed the trans mount
was in dire need of replacement. I used the Prothane mount as it seemed
the closest to the stock thickness. It was a fairly painless
swap....but now I have this vibration that starts to be noticeable at
about 40 MPH - it gets smoother as speed goes up but it is still
noticeable....does not change with the clutch in or the trans out of
gear and coasting. It is very apparent for in the 40-55 MPH range. My
first reaction was to replace the u-joints, absolutely no change. So I
am now wondering if anyone has a stock 5-speed trans mount they could
measure for thickness? Mine was so far gone I could not salvage the
pieces.....! Or could this be a drive shaft balance problem?
Mark
-Ohio
------------------------------
_______________________________________________
Datsun-roadsters mailing list
Datsun-roadsters@autox.team.net
http://autox.team.net/mailman/listinfo/datsun-roadsters
End of Datsun-roadsters Digest, Vol 4, Issue 330
************************************************
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|