You can remove that without any adverse effects. That hose warms the manifold
and will help the engine smooth out more quickly in cold weather. You will
have to plug the outlet on the water pump and the front and rear inlets on the
manifold. The manifold inlet/outlets are a bugger to get out of the manifold.
That could be a show stopper for you if they are really frozen in place.
There is an inlet and outlet hose from the heater core, you could even connect
those together to close that part of the system off. Have fun, Dewey
-----Original Message-----
>From: Tim <tputland@charter.net>
>Sent: Oct 3, 2008 3:08 PM
>To: "datsun-roadsters: autox.team.net" <datsun-roadsters@autox.team.net>
>Subject: [Roadsters] heater core hose
>
>I have a hose on the SRL that runs from a T right in front of the carbs to the
>fire wall. The PO has it installed so it rubs on the steering column. It is
>very close to being rubbed trough.
>
>My question: can I just remove this hose and plug both ends or does it have to
>be installed? I do not need a heater.
>
>Tim
>Belleville, WI.
>'70 SPL AND SRL
>Still clueless but always learning
>________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>You are subscribed as hahlbohmd@earthlink.net
>
>Datsun-roadsters mailing list
>
>http://www.team.net/archive
>
>http://autox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|