> tonight i checked the compression. 0, 0, 90, 120
Sorry, dude. Your head gasket is gone.
You'll find it's breached between the #1 and #2 cylinders.
Tight valves or a closed throttle will create low readings, but
zero means there's a significant hole somewhere. Not going to be
your rings, either. Could be you burned holes in both #1 and #2
pistons :-) Possible if your front carb is way lean but not likely.
It's the head gasket. Check carefully for warpage and defects on
the head itelf. If a U20 you need to check the TOP surface as
well, or you risk the camshaft. I bought a spare head for my 1200
once, for $1, after the owner managed to burn a trough into the head
between two cylinders.
-- John
John F Sandhoff sandhoff@csus.edu Sacramento, CA
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|