Well I was able to get some extra nuts, and like Victor said it looks like
the head is 17mm. The one that I took off was 15, IIRC. Think I'll call
Courtesy and some of the vendors to see if they have the OEM style bolts &
nuts before I start putting things back together. Not that I'm a stickler
for OEM bits. They're just easier to get to and use.
As soon as the cable guy shows up to check this modem (it keeps losing the
cable signal) I'll go give turning the stud to get the water pump loose a
shot. If that doesn't work it's propane time.
Thanks folks,
Ron
>> Ronnie Wrote - I need to know the thread pitch on the large lower water pump
>> stud. ~ but couldn't get the nut to thread on to the 1.50 pitch metric bolts
>> and the threads are too fine for 3/8 SAE 16 thread and too coarse for 24.
> Victor:
> 10X1.25 tough to find. Anyone ever find these with the stock 14mm wrench size?
> I can only find the with a 17mm head, and a DON"T LIKE IT!
|