Re: Water Pump Stud Thread

[Victor Laury <vlaury@earthlink.net>]

>Ronnie Wrote - I need to know the thread pitch on the large lower water pump 
>stud. ~ but couldn't get the nut to thread on to the 1.50 pitch metric bolts 
>and the threads are too fine for 3/8 SAE 16 thread and too coarse for 24.


10X1.25 tough to find. Anyone ever find these with the stock 14mm wrench size? 
I can only find the with a 17mm head, and a DON"T LIKE IT!