My brother had a set done by Whitepost... VERY nice rebuild! Also, for
those of you on a bit more of a budget, Carl Jaeger does a stainless steel
rebuilt unit that works great! Not sure of his current pricing, but you
won't regret it! I have 2 sets on my cars now... no problems! Then again,
I bleed my brakes every year too..
Eric
> If they are free of pitting they are a snap to rebuild. If there is ANY
> sign of pitting they should be replaced or re-built.
>
> Personally, I would have then re-built. It costs a few dollars more per
> cylinder but it is a lifetime deal. They are relined with brass or
> stainless and will not rust as will the original steel cylinders. One
place
> that will do it is White Post Restorations at http://www.whitepost.com/
> They are quite familiar with our brakes as they are the same design used
on
> a number of high-end British cars.
>
>
> Best regards,
>
> Fred Schroeder
> '70 2000
> SRL311-13359
> TDROC
> Home page http://schroeder-family.us
> e-mail roadster@schroeder-family.us
|