What's the dimensions of the shroud, relative to the size of the
Roadster radiator, and how thick front-to-back overall is the unit?
- Bob
gregs672liter@netzero.com wrote:
>I think you have found it! The numbers are a bit hard to read, but that
>sounds like it. GREAT! This is definitely a puller fan as it pulled when it
>was wired correctly. Great job guys. I will now go seach for an Elantra
>92-95 and confirm. I will keep you posted!
>Greg
>
>-- RWM <RWM@rwmann.com> wrote:
>Is the Elantra a/c fan a pusher or puller? There is also a radiator fan
>assembly, p/n H160915 or 25386-28000.
>
>- Bob Mann (currenty running a SPAL fan replacing the 7-blader)
>
>John Brooks wrote:
>
>
>
>>Could this be the fan? It has number 25391-28000
>>which is close... And it is from Hyundai Elantra
>>92-95, which also has an H in it...
>>http://www.autobodypartsonline.com/cgi-bin/webc.cgi/st_prod.html?p_prodid=17731&p_catid=25
>>
>>
>>Keep us posted.
>>
>>John
>>
>>
>>
>>
>>
>>>Date: Tue, 15 Jun 2004 22:04:22 GMT
>>>From: <gregs672liter@netzero.net>
>>>Subject: cool fan, need help
>>>
>>>Hi gang, I was digging through the wrecking yard the
>>>other day and found the perfect electic fan for us
>>>Roadsters. Only problem is it was sitting on the
>>>wall and nobody knows what it came off of. I have
>>>spent hours trudging through yards now looking at
>>>all kinds of makes of cars and have not found
>>>another. The fan has the following info on it:
>>>Aisin 81900-2205 (on a metal sticker) and HMC
>>>25381-28000 "painted" or paint stamped on it. Aisin
>>>is the manufacturer, but a search of their web sites
>>>does not reveal a way to search by part number. I
>>>believe that HMC stands for Honda Motor Company, but
>>>a part number search via a few web sites does not
>>>result in a hit (I also tried other manufucturers
>>>that start with H). I am about to call Honda and
>>>see if they can cross it... any other suggestions?
>>>As I said, this is the PERFECT fan for us
>>>Roadsters... very powerful, easily mounts to the
>>>existing rad, leaves about 1/2 an inch in front of
>>>the water pump shaft (at least on a 160!
>>>0... have not tried it on the 2000) and it only cost
>>>me $25.00. The 1600 is much happier with its new
>>>fan over the old noisy 7 blade. Thanks for any
>>>help!
>>>Greg
|