I have a question for the group on wiring?
I am rebuilding a 1600 '69. I have an old one that I am using for parts
and picked up a "68 that was registered as a '69.
I also purchased a 2000 '69 wire harness that I am using since my old car
continually had electrical problems. ( Melted on Fuse Box.)
Question I have is:
On the wires that come thru the fire wall below the glove box:
Three sets:
1st Yellow that connects to the brake junction box. ( What ever it
is called.)
2nd Two wires:
Black and a Yellow wire inside a black sleeve.
Where do these wires go? Coil?
3rd:
Black / white strip with white band
Black / white strip with a red band
Black / white trip with no band.
Black
Question:
Which wries go to the Coil?
Which wires go to the Resistor?
Does one of these wires go to the Distributor? If not where do I hock
up
the wire from the distributor.
I should have done a better job of marking the wires when I stripped my
original '69.
Thanks for all your advise,
Jeff Rice
'69 1600 - Parts car
'68 1600 - Coverting into a '69 ( Completely rebuilding frame up)
'66 1600 - Project next winter for my father.
|