Is there any way to recalibrate the temp gauge?
If getting a new temp sender and sorting out the ground, the gauge now
works, but it reads extremely low - just barely into the normal range that's
marked on about the bottom 1/8 of the dial. If the gauge reads from 120 to
250, it would seem the guage is reading about 125 fully warm.
Is there any way to recalibrate the gauge so I can drive with some
confidence knowing I'm not over heating or is the gauge just very imprecise
and will it read hot if it is (as the needle pegs when I went straight to
ground to test the gauge).
Thanks!!
Jim Sylvester
'68 2000
SRL311-05385
U20-06823
<http://www.racerguy.com/jimS_2000.html>
|