I'm certain the disc is installed properly, with the extended hub facing the
tranny. Is the conversion from a 1600 to a 2000 clutch supposed to include
changing to a 2000 sleeve for the release bearing? I don't know if the sleeves
are dimensionally different for a 1600 versus a 2000.
Adam Bradley wrote:
> When I had the disc in backwards, the clutch would disengage but would make
> horrible clunking and sudden, jerky motions when engaging and
> disengaging. When we took it out, the flywheel bolts had hit the clutch
> springs so much that a few of the springs broke clean out of the disk.
>
> At 11:02 PM 4/29/2002 -0400, SRL311KA@aol.com wrote:
> >Sorry, sounds like the disc is in backwards.
> >
> >Bill Kenyon
/// datsun-roadsters@autox.team.net mailing list
|