Thanks, Greg, that makes a difference.
Since the brake lights work thorough the same filaments as the turn
signals, so, if the stop lights work thw wiring from the turn signal
switch to the tail lights is OK.
The only thing that is common to both sides, both front and back, is the
turn signal switch and its associated wiring under the dash. You say that
you replaced the flasher, which was bad and now you can hear the flasher
clicking, but no lights flash. This seems unusual. The flasher needs a
load (lights) to do anything. If the lights are not flashing, but the
flasher is clicking, there is something else going on that we don't see.
According to the wiring diagram that I am looking at the wires that go to
the flasher are white and green. If this is what you have there is
probably either a short somewhere in your wiring, a defective hazzard
switch, or something wrong with the turn signal switch. Are you sure the
flasher that is clicking is the turn signal flasher and not the hazzard
flasher or the dash voltage regulator? I think that the clicking that you
are hearing is not coming from the flasher, but the dash regulator, which
is nearby.
What happens when you turn on the hazzard switch? It uses a separate
flasher.
Peace,
Pat
- Support Habitat for Humanity, A "hand up", not a "hand out" -
Pat Horne, Network Manager, Shop Supervisor, Future planner
CS Dept, University of Texas, Austin, Tx. 78712 USA
voice (512)471-9730, fax (512)471-8885, horne@cs.utexas.edu
On Thu, 25 Apr 2002, Greg Hare wrote:
> Sorry -I should have said do they stop BLINKING
>
> 69 1600, I found a bad wire going into the taillights, gonna fix it after
> work anyway, but the problem is: All the tailights and brakelights come on,
> but I get no turn signals. the flasher was bad, I replaced that, now I hear
> the flasher but nothing happens to the lights.
>
> -----Original Message-----
> From: owner-datsun-roadsters@autox.team.net
> [mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of Patrick J.
> Horne
> Sent: Thursday, April 25, 2002 10:01 AM
> To: Greg Hare
> Cc: Roadsters (E-mail)
> Subject: Re: turn signals (late)
>
>
> Depends. If you loose a bulb only one side will be affected. There is a
> multiple pin connector under the dash where the rear harness plugs into
> the dash harness. If that one comes loose it will affect both sides. Same
> with the connector where the turn signal switch plugs into the dash
> harness. There is also a connector on the early cars where the optional 4
> way flasher switch plugs in. If there is not a switch there is a jumper
> plugged into the connector.
>
> What year do you have and give us more of a description of the problem ahd
> how it started.
>
> Peace,
> Pat
>
> - Support Habitat for Humanity, A "hand up", not a "hand out" -
>
> Pat Horne, Network Manager, Shop Supervisor, Future planner
> CS Dept, University of Texas, Austin, Tx. 78712 USA
> voice (512)471-9730, fax (512)471-8885, horne@cs.utexas.edu
>
> On Thu, 25 Apr 2002, Greg Hare wrote:
>
> > If you lose a bulb or connection somewhere do ALL turn signals stop
> working?
> >
> > /// datsun-roadsters@autox.team.net mailing list
> > /// Send admin requests to majordomo@autox.team.net or go to
> > /// http://www.team.net/cgi-bin/majorcool
> > /// Send list postings to datsun-roadsters@autox.team.net
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|