Bingo -- the list strikes again. Perfect answer.
BTW -- that's about the time I bought mine, 1986.
Thanks
Gary C
In a message dated Mon, 11 Mar 2002 12:54:16 PM Eastern Standard Time, "Tom
Phelan" <tomph@mchsi.com> writes:
> Hi There,
>
> I have an Allison XR-700 and on the back there is a little label that says:
>
> "Large red to coil +
> Large black to coil -
> Purple to engine ground.
>
> Do not connect the wires in the grey cable to any point on the coil or
> Vehicle"
>
> Hope that helps. BTW - mfg date on mine is Feb-28-1986. Not as old as I
> thought.
>
> Tom P
>
> <snip>
>
> > Just after transistors were invented I put an Allison crane ignition (I
> > think, it was a long time ago) in my 1600. The papyrus on which the
> > instructions were printed has returned to the earth, and I am wondering if
> > anyone else used the same setup and has the old instructions.
> >
> > My unit has three wires in a gray sleeve to the dizzy, and what appear to
> be
> > black, red and purple leads coming out of the transistor and heat sink.
> > Looks like the black and red go to the coil, and the purple to ground, but
> I
> > wanted to see if anyone else has the same unit and can confirm this.
> >
> > The Crane web site doesn't have anything that old.
/// datsun-roadsters@autox.team.net mailing list
|