Hi There,
I have an Allison XR-700 and on the back there is a little label that says:
"Large red to coil +
Large black to coil -
Purple to engine ground.
Do not connect the wires in the grey cable to any point on the coil or
Vehicle"
Hope that helps. BTW - mfg date on mine is Feb-28-1986. Not as old as I
thought.
Tom P
<snip>
> Just after transistors were invented I put an Allison crane ignition (I
> think, it was a long time ago) in my 1600. The papyrus on which the
> instructions were printed has returned to the earth, and I am wondering if
> anyone else used the same setup and has the old instructions.
>
> My unit has three wires in a gray sleeve to the dizzy, and what appear to
be
> black, red and purple leads coming out of the transistor and heat sink.
> Looks like the black and red go to the coil, and the purple to ground, but
I
> wanted to see if anyone else has the same unit and can confirm this.
>
> The Crane web site doesn't have anything that old.
/// datsun-roadsters@autox.team.net mailing list
|