After seeing all the posts about tire size, I guess
I'll throw my sizes out there just for fun. The fronts
are 20x9x13 on a 13x8 rim with 3" backspace. Tuck
nicely under the front fender flairs. The rears are
23x10x13 on 13x10 wheels with 2" backspace. After a
full year of trying I finally have the rear track
wider than the front. They do stick out a little past
the rear fender flairs though, but only by about 1.5
inches. Does this help anyone? :)
Don Miller
69 Turbo V-6 (only one for now)
Meridian, ID
--- Victor Laury <vlaury@earthlink.net> wrote:
> Chris,
>
> If your wearing the stock 4.5 inch wide wheel,
> 189/60/14 will work well.
> I have 5.5 alloys using 195/60/14 with no problems
> Right now I have the racing tires on 205/55/14 - but
> I think your offset has
> to be just right for these.
>
> ----- Original Message -----
> From: The Belgian Roadster <chriss@euregio.net>
> To: Thomas <csp311@telia.com>;
> <Phillip.Hall@msfc.nasa.gov>
> Cc: <datsun-roadsters@autox.team.net>
> Sent: Monday, August 28, 2000 12:24 PM
> Subject: Re: 5.60 - 14 tires
>
>
> Hi List,
> I got my roadster from the States latly. Tires size
> is 185/75 R14.
> Here in Europe 75 is only for light weight trucks,
> and these tyres are
> reinforced, also called 8 plie.
> I also want to change the tyres to some Yokohama,
> but which size?
> 185/70/14-195/60/14????
>
> Chris-The Belgian Roadster
>
> -----Ursprüngliche Nachricht-----
> Von: "Thomas" <csp311@telia.com>
> An: <Phillip.Hall@msfc.nasa.gov>
> Cc: <datsun-roadsters@autox.team.net>
> Gesendet: Montag, 28. August 2000 20:29
> Betreff: Re: 5.60 - 14 tires
>
>
> > 645 mm is 25.39370 inches but I 'm not shure if
> > the last decimal is correct. ;-)
> >
> > Charlie Chan was Swedish too. (Honestly, he was!)
> > That would be a $1 million question for Regis.
> > Also that skunkworks guy, Holly Johnson.
> >
> > Thomas
> > in Sweden
> >
> >
> > Hall, Phillip wrote:
> >
> > > If anyone is interested, I know where to get a
> set of original
> tires from
> > > '66 (I think) still in the paper wrapping. Good
> for that "perfect
> to the
> > > last detail " restoration.
> > >
> > > I am mostly Swedish, but don't know Swedish - I
> guess you are
> safe
> > > Thomas:-) You did that mm thing to mess with
> our heads didn't you
> :-)
> > >
> > > Phil
> > > SEROC
> > >
> > > -----Original Message-----
> > > From: Thomas [SMTP:csp311@telia.com]
> > > Sent: Monday, August 28, 2000 12:00 PM
> > > To: bob_wilson@agilent.com
> > > Cc: datsun-roadsters@autox.team.net
> > > Subject: Re: 5.60 - 14 tires
> > >
> > > A new 5.60-14 diagonal ply tire is 645
> mm diameter.
> > > The 80% +-2% or 80-profile is only used
> for radial tires
> > > if no profile is given in the dimension
> code.
> > >
> > > Thomas
> > >
> > > PS. Any flaming sent to me must be
> written in Swedish from
> now on.
> > > Thank you!
> > >
> > > bob_wilson@agilent.com wrote:
> > >
> > > > HI list,
> > > > The stock tire that is listed on the
> original spec sheet
> for the
> > > roadsters
> > > > is 5.60 - 14.
> > > >
> > > > Does anyone know what the final tire
> outside diameter
> was? Some
> > > have said
> > > > that when the aspect ratio is not
> given (the 2nd number
> in the 3
> > > number
> > > > designation) that you are to assume
> 80% (or 78%). Using
> this
> > > results in an
> > > > outside diameter of the wheel/tire of
> around 23".
> > > >
> > > > Yet people on the list have discussed
> wheel/tire combos
> that
> > > result in more
> > > > than 24" outside diameter.
> > > >
> > > > I can't seem to find any description
> of this old
> numbering scheme
> > > (x.xx - yy
> > > > versus the new scheme xxx/yy - zz).
> > > >
> > > > Bob Wilson
> > > >
> > > > -----Original Message-----
> > > > From: Fred_Katz@ci.sf.ca.us
> [mailto:Fred_Katz@ci.sf.ca.us]
> > > > Sent: Friday, August 25, 2000 10:19 AM
> > > > To: Chris
> > > > Cc: Datsun roadster list
> > > > Subject: Re[2]: Wheel Offset
> > > >
> > > > Chris,
> > > >
> > > > Go with CDM on this one. Not all
> Panasports bolt right
> up on our
> > > roadsters
> > > > without interference. Les & Dennis
> will do it right for
> you. I
> > > don't know
> > > > that Dean wouldn't. But CDM went out
> of their way to
> explain what
> > > works
> > > > best for me, and they know Panasports.
> I would have
> their
> > > Panasports on my
> > > > '66 if I didn't end up getting Libras
> after admiring
> Calspeed's
> > > Libras.
> > > >
> > > > Fred
> > > > BADROC
> > > >
> > > > ________________________ Reply
> Separator
> > > __________________________
> > > > >Subject: Re: Wheel Offset
> > > > >Author: Dennis Currington
> <dc311@mail.com>
> > > > >Date: 8/25/2000 8:26 AM
> > > > >
> > > > >Chris wrote:
> > > > >
> > > > >> Let's all chant the mantra . . .
> Panasport,
> Panasport,
> > > Panasport.
> > > > >Dean at > Fairlady has 'em.
> www.datsunparts.com on the
> > > suspension
> > > > >page.
> > > > >
> > > > >AND SO DOES LES & DENNIS AT CDM :-)
> at
> classicdatsun.com.......
> > > > >
> > > > >Dennis
> > > > >--
> > > > >Dennis Currington
> > > > >San Diego
> > > > >Datsuns.net
> > > > >
> > >
> >
> >
> >
> >
>
>
>
__________________________________________________
Yahoo! Mail - Free email you can access from anywhere!
|