Re: Jetfire

[VulForge@aol.com]

In a message dated 1/24/99 11:19:06 AM Central Standard Time,
rday@cyberramp.net writes:

<< The biggest problem, IMHO, with a lot of the more "modern" 
 aluminum block motors is that you can't really rebuild them. Many use 
 wear coating on the aluminum bores that goes away if you bore, even hone, 
 the cylinders. >>

Bore-Tech, among others will recoat with a better-than-factory cylinder
plating.  Most modern motorcycles are built with no liners.

Russ
67 1600