To: | <buick-rover-v8@autox.team.net> |
---|---|
Subject: | clutch housing bolt pattern |
From: | "jon" <jonaxt@pacifier.com> |
Date: | Mon, 4 Mar 2002 09:23:20 -0800 |
Does anyone have precise dimensions for the mounting holes of the clutch housing? In particular I need the position of the two dowels relative to the crank. As close as I can measure they are both on 7.281 (7 9/32?) radius. The one above the starter is 22.06 degrees above the horizontal, and the other dowel is on a horizontal line with the crank. Jon /// /// buick-rover-v8@autox.team.net mailing list /// |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Anti-tlt device, Barrie Robinson |
---|---|
Next by Date: | Re: clutch housing bolt pattern, James Bown |
Previous by Thread: | Anti-tlt device, Barrie Robinson |
Next by Thread: | Re: clutch housing bolt pattern, James Bown |
Indexes: | [Date] [Thread] [Top] [All Lists] |