Bruce,
Good to hear from you again! If the nut is truly as tight as you say, and
you have new nuts, I would use a nut splitter. Splitters are available in
different sizes and work very well and will not damage the threads, but
please wear some eye protection. Can you not tell from the new nuts if they
are right or left hand thread?
Cheers, "Bob".
> From: Eganb@aol.com
> Reply-To: Eganb@aol.com
> Date: Sat, 5 Apr 2003 17:23:36 EST
> To: british-cars@autox.team.net
> Subject: Help with rusted nut on McPherson strut?
>
> Folks,
>
> Front end rebuild has been going swimmingly on my 1980 TR7 until just now. I
> can NOT unscrew the large securing nut to take the damper/strut out of the
> strut tube. How tight is it on? Well, I've got a pipe wrench on the tube
> with about a two foot extension, and the nut locked in a bench vice, and all
> I'm doing is lifting the whole bench off the floor. I suspect this nut has
> never been off -- so 23 years of crud have had time to accumulate.
>
> Some thoughts.
>
> 1. By any chance are those nuts reverse threaded?
>
> 2. My British Leyland stuff on suspension talks about drilling out the
> "peening" at the top of the tube before removing the nut. I guess the
> "peening" is like a flywheel key, a bit of metal that prevents the nut from
> turning. Or maybe it is a dimple made my a punch? I can't see it, and I've
> steel wooled the tube looking for it. Maybe the later years didn't have it.
>
>
> 3. I've soaked the tube and nut in PB Blaster with no result. Also tried
> heating the tube with my propane torch. I didn't want it to get too hot, and
> I didn't know if the stuff inside the old shock absorber might expand/blow
> up, so I just made the tube too hot to touch, not glowing red or anything
> like that, but the nut still won't budge.
>
> 4. The new struts come with new nuts, so I can destroy the old one, but I
> don't want to mess up the threads in the tube.
>
> So, any fabulous ideas? As always, thanks in advance.
>
> Bruce
> 1980 Inca Yellow TR7 5-speed convertible
> Chapel Hill, NC
>
> "Send lawyers, guns and money." - Warren Zevon
>
> "Dead fish go with the flow." -- Anon
>
> /// british-cars@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net
> /// or try http://www.team.net/cgi-bin/majorcool
> /// Archives at http://www.team.net/archive
> /// Send list postings to british-cars@autox.team.net
/// british-cars@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|