The position of the jack shaft is not as critical as the other gears. You
will need ti set the crank shaft at T.D.C. and the cam shaft with the notch
lined up then set the jackshaft with the distributor installed and pointing
to the small plastis insulator on the distributor body, which is the number 1
cylinder. You will then need to set the chain in place with all of the slack
in the tensioner area and install the tensioner. You then will adjust the
tension on the chail rails.
David Nock
President/Service Manager
British Car Specialists
2060 N Wilson Way
Stockton Calif. 95205
209-948-8767 fax 209-948-1030 email HealeyDoc@aol.com
Visit our new web site at <A HREF="http://britishcarspecialists.com/";>
BritishCarSpecialists.com</A>
========================================
Tech Talk Books available for Austin Healey, MG, and Triumph.
++++++++++++++++++++++++++++++++++
|