> I'm attempting to refinish the ratty dash on my GT6+. The shellac, or
> whatever it is, on the wood must be 1/32" thick or thicker, and is hard
> as a rock. It chips off in many places, but where it's stuck, it's STUCK.
If it is shellac, alcohol will dissolve it, and strippers which don't
contain alcohol probably won't. There used to be a product sold called
CleanWood which would dissolve _anything_. Try some of that if you can
find it.
timd@ptltd.com (Tim Dziechowski - Phoenix Technologies - Cambridge, Mass)
|