Soldering stuff......

["DEHAAS, MARK" <dehaasm@napc-1.navy.mil>]

Like most of the net I to prefer to solder as many connections as
possible.  I've found the best way to link electrons is to use
those non insulated crimps and once the two ends are crimped fuse
the whole mess together with some solder.  I've never needed
to use flux.  Then finish the connection with some shrink tubing.
Dont use electrical tape that stuff su
Well you know what I mean.....:-)
And one other thing is to use tie raps so wires aren't bouncing 
around.

Mark deHaas
dehaasm@napc-1.navy.mil