RE: pulling a midget engine...

[Geronimo x54903 page 951-3432 <GENDIMEN@T12SYS.intel.com>]

>> Midget engine stuff deleted

I don't know how much the midget clutch parts cost, but if you're going to do
the clutch you might as do it complete and get a replacement clutch disk,
pressure plate and throwout bushing and get the flywheel resurfaced.  I did my
GT6 a few years ago and everything new cost about $140.  I cut corners on a
clutch a few years back when I did the engine on my truck and a year later I
had to pull the clutch out again.  Do it right and you'll only do it once.

Mike G.