Re: Spit/GT6 conversion

[Dick Nyquist <dickn@hpspdln.spd.hp.com>]

.....................
| clearance trouble exists.  If you redesign the entire front suspension, I am
| sure that you can lower the motor.
| mjb.


to get it low enough to fit under a Spitfire hood you also might 
want to remove the front crossmember.

I have dents in the hood of my gt6 from hose clamps being put on 
with the screw on the upper side of the hose rather then the 
lower side.     8^(
dick