Hard to say, but if the harness is as poorly constructed as 1609, I
would tear it all out and start again. Mine was a fire trap with bad
crimps, splicing with cold solder joints in mid wire, etc. All a
source of voltage drop.
GM
-----Original Message-----
>hello, all-- 1st thanks for the door adjustment info. but while in
the
>process of adjusting how fast the doors open and close the
passenger
>side door quit working. as far as i can tell the electromagnet
around
>the valve to open the door is only getting about 9.6 volts and the
>drivers side is getting 12.5v or so.does anyone have an idea what
could
>be the problem? thanks again--jay #2112
>
>
|