Phil,
Grand Auto, Ooops Kragens has a convertor that will work if you have a
domestic trailer, and the tow vehicle has the amber turn signal lights.
Barry
At 11:15 AM 6/1/00 PDT, Phil Esra wrote:
>Okay, I told you I was going to ask more questions. I just bought an 80cc
>shifter kart, which I'm going to tow behind the MR2. Nobody makes a plug-in
>wiring harness for it (towing with an MR2??), so I bought a generic, 4-wire
>connector to match the plug on the trailer. I don't have a great grasp of
>electricity, but I don't see how I can set the trailer up (using the current
>4-wire plug) to have turn signals without causing the car's turn signals to
>come on under braking? Any suggestions?
>
>Also: what's the preferred techniqe for splicing the wires in? Are you
>s'posed to solder them, or can I use those little pincher thingies, or wire
>nuts?
>
>Thanks! I bow in ignorance before the collected wisdom of ba-autox.
>
>Phil
>________________________________________________________________________
>
>
|