What about the use of poly spacers? Would that move you to an SP
class? :-D
Keath Marx wrote:
>Okay, Okay...
>
> I didn't ask the question to start a religious war over whether the
>Harness Bar is Less Filling or Tastes Great.
>
>I am looking for a solution. I have seen a couple of ideas that I might
>try.
>
>Here is one I came up with this afternoon. Take the Hardbar. I downloaded
>and read the install instructions. They show stainless Steel spacers going
>on the bolt between the bar and chassis. What if you left those off? Then
>the bar would not be in physical contact with the chassis. Next, get some
>longer bolts of the same grade and some 3/4 or 1/2 inch soft rubber washers.
>Put the washers between the bolt head and the bar. This way if the chassis
>flex pulls apart the washers flex and let the car structure move but keep
>the bar from rattling all of the time.
>
>Would this work? It seems to me it would meet the letter of the rules and
>should be sturdy enough to handle 1 harness while autocrossing.
>
>Thanks
|