autox
[Top] [All Lists]

RE: S2000 ring & pinion ratio question

To: Mike Clements <mikec@actional.com>
Subject: RE: S2000 ring & pinion ratio question
From: Tony Payne <anthonyp@dslextreme.com>
Date: 25 Apr 2003 10:35:59 -0700
On Fri, 2003-04-25 at 09:59, Mike Clements wrote:
> Problem is, the stock gearing still is way too tall: 80+ MPH in 2nd gear
> and hard to get out of the hole from a standing start. The car feels
> like it wants more gear and with a 9000 RPM redline there's no reason to
> fear the gear.
> 
> I figure a 16% shorter (numericall bigger) ratio is about optimal: 16%
> more acceleration in every gear, easier to get out of the hole, yet
> still able to hit 65 or so in 2nd. This is probably closer to the ratio
> the engineers originally intended before they had to meet EPA and CAFE
> regulations.

Stock gearing puts you at about 64mph in 2nd.  People have been putting in 
4.44 and even 4.77 gears in the rear end and I've heard a lot of good 
things about them, especially the 4.44s.  With the 4.44s, you get about 
59mph in 2nd.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Partial archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>