Who the hell is going to carry 16x16 steel plates around to set them up???
KeS
(yes, I'll work protest, I'll work grid - *please* don't make me set up
the barrier tape!)
On Wed, 26 Sep 2001, Dan Morency wrote:
> 16 x 16 1/8 inch plate, painted black (16 x 16 gives very good yield from a
> sheet of steel)
> conduit for the uprights, 1/2 inch is plenty stiff
> drill a hole in the center of the plate for a bolt to slide into conduit
> We made 5/8 bolts by welding threaded rod to a washer. 5/8 carriage bolts
> were too $
> I plan on welding a 5/8 nut on the end of the conduit
> store plates in a wooden box, stacked
> store conduit standing up with one end in a box, the other
> screw plate to end of conduit through hole in plate.
> you can use take off tires for additional weight
>
> Dan Morency
> President
> Cumberland Motor Club
> www.CumberlandMotorClub.com
>
> /// autox@autox.team.net mailing list
> ///
> /// To unsubscribe send a plain text message to majordomo@autox.team.net
> /// with nothing in it but
> ///
> /// unsubscribe autox
> ///
> /// or try http://www.team.net/cgi-bin/majorcool
> ///
/// autox@autox.team.net mailing list
///
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe autox
///
/// or try http://www.team.net/cgi-bin/majorcool
///
|