autox
[Top] [All Lists]

RE: Antiseize on wheel studs causes binding?

To: rsmith@bfmni.com, autox@autox.team.net, JoeT@ryersoncoil.com
Subject: RE: Antiseize on wheel studs causes binding?
From: Jack.Stone@Eng.Sun.COM (Jack Stone)
Date: Tue, 27 Jun 2000 15:40:58 -0700
Joe,

If you replaced the nuts/bolts with aftermarket items
do they match the same seat angle?  If you look at 
your wheels in the area the nuts/bolts seat is there
an area scored???

If so then you need to fix it as this may be a possible
problem.

jack ~


> From autox-owner@autox.team.net Tue Jun 27 15:15:41 2000
> From: "Tharpe, Joe (RyTull Coil)" <JoeT@ryersoncoil.com>
> To: "'rsmith@bfmni.com'" <rsmith@bfmni.com>,
>         "'AutoX'"
>        <autox@autox.team.net>
> Subject: RE: Antiseize on wheel studs causes binding?
> Date: Tue, 27 Jun 2000 17:09:11 -0500
> MIME-Version: 1.0
> X-MIME-Autoconverted: from quoted-printable to 8bit by teamfat2.dsl.aros.net 
>id QAA22178
> Content-Transfer-Encoding: quoted-printable
> X-MIME-Autoconverted: from 8bit to quoted-printable by engmail3.Eng.Sun.COM 
>id PAA25478
> 
> On a related subject, 
> I am using the stock aluminum wheels, I have noticed that in between runs,
> the torque on the lug nuts will loosen by about 5-7 pounds during the first
> run of the day.  After the first run they usually loosen by about ½ that
> each run up to the 4th run they don't loosen any more.  Any thing I should
> be concerned about?
> 
> I check/torque the lug nuts to 95 ft lbs before each run. 
> 
> Thanks in advance,
> Joe T
> 
>               -----Original Message-----
>               From:   rsmith@bfmni.com [mailto:rsmith@bfmni.com]
>               Sent:   Tuesday, June 27, 2000 4:52 PM
>               To:     'teamnet'
>               Subject:        RE: Antiseize on wheel studs causes binding?
> 
>               I've been using anti-seize on wheel studs for what seems
> like forever and
>               have never experienced a problem. At almost every event I
> have attended
>               there was one or more racer-wanna-bes that just broke a stud
> and had to go
>               home, unfulfilled. Many times I hear the high pitched
> screams of an almost
>               seized lug nut on a stud just ready to gall the treads or
> break.
> 
>               I clean the studs with a hand operated wire brush every 3 or
> 4 tire changes
>               and re-apply a light coat of anti-seize. I also replace the
> lug nuts every
>               2 or 3 years just to be safe.
> 
>               A broken wheel stud can really ruin your day.
> 
>               RacerRobb

<Prev in Thread] Current Thread [Next in Thread>