alpines
[Top] [All Lists]

Re: [Alpines] alternator relay rating ..

To: Barry Hayes <bhayes@cs.stanford.edu>
Subject: Re: [Alpines] alternator relay rating ..
From: "Steven L. Finberg" <w1gsl@MIT.EDU>
Date: Thu, 01 Oct 2009 22:50:37 -0400
Hi Barry

Its not rated for current.  The warning ligth simulator...
only runs the red ligth on the dash....

With the stock 10AC Alpine alternator the regulator is 
solid state and has no internal relays.  If you can't find 
/ don't want to trust the lLcas regulator you can use almost 
any american external alternator regulator.

The warning light simulator was a bass ackwards attempt to save 
a few cents on some diodes in the alternator..  The Lucas part was a heat 
operated relay  and was even less reliable than normal Lucas stuff.

  The standard 
american alternator solves the warning light problem much more eligantely.

If you want a working improvment that looks 
stock there are published transistor circuites 
you can build into an old warning light simulator housing.

Steve F

*******************************************************************************
Steve Finberg                        W1GSL                       w1gsl@mit.edu
PO Box 397082 MIT Br        Cambridge MA  02139-7082              617 258 3754
*******************************************************************************
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>