Bill:
Before you get excited and do unnecesssary work, have you checked your
ground? The fuel gauge, and others, will display erratic readings if
they have a poor ground. Also, I will check my archives to see if I have
anything to add to Julian's info. (Of course, you need to deal with the
leak first).
Ron Tebo
Bill Mounce wrote:
> Hello all
>
>
>
> My fuel sender is not working, and worse, it is leaking. I am going to pull
> it out and bench test it (i.e. stare at it with a slack jaw and puzzled
> look, most likely). Prior to yanking it, I wish to fabricate a metal disk
> to replace it for the time being. Would someone have either a left hand
> tank, or a sending unit, which they could measure and provide me with the
> correct diameter? That way I don't have to leave it open (we have an open
> container law in my township!).
>
>
>
> Thanks in advance,
>
>
>
> Bill Mounce
>
> Easton, PA
>
> 1967 SV
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines
http://www.team.net/archive
|