Coke works good too! deruster
Chuck
-----Original Message-----
From: owner-alpines@autox.team.net [mailto:owner-alpines@autox.team.net]
On Behalf Of hughes
Sent: Monday, August 04, 2003 5:07 PM
To: PApple16@aol.com
Cc: Thomas Wiencek; Alpine, Message
Subject: Re: Tech Tip
If you think Brake Fluid is strange, how about Molasses as a part
de-ruster?
http://members.optusnet.com.au/thebecketts/rover/rust.htm
This page is part of Ron Becketts website - Ron is a long term Hillman
fan.
Cheers
Vic
PApple16@aol.com wrote:
> He hit it right on the nose with the brake fluid, in years past, i
managed to freeup a frozen morris mionor engine block with brake fluid.
had to let it sit for a week or more, but the engine turned freely when
done. the brake fluid will ruin pot metal parts if left imersed too
long. the pistons did show some minor pitting, but the engine ran fine
after a minor rebuild.
>
> another great rusty part disolver, is a product called TASCON, which
is the chemical that they use to put the odor in natural gas. ( can be
hard to get)
>
> paul in Ri
|