While dropping of my cam at Isky Cams the other day an engineer there told me
about a machine shop that would regrind my lifters for $1.50 each and that
there would be no problem with grinding past the hardened portion of the
lifter. Says they do it all the time and that they don't have problems doing
this. Seems to know his stuff- he's been desighning mods etc for isky for 20
years.
thanks for the info.
Eric '62 Ser II
B9105234LRX
Steven Silverstein <milano164@mediaone.net> wrote:
>
> Eric,
>
> If you are having your cam reground you will want new lifters. You can have
> the ones you have refaced but It may be cheaper to buy new and save the old
> ones for the day when you can't get them any longer.
>
> Steer clear of Victoria British lifters. I have some lifters with chipping
> at the top edge which I believe are VB's. I had to replace a few lifters
> due to pitting caused by the car sitting for numerous years before I bought
> it.
>
>
> Good Luck,
>
> Steve
|