alpines
[Top] [All Lists]

Re: Ferrari in an Alpine

To: Jarrid Gross <JGross@econolite.com>
Subject: Re: Ferrari in an Alpine
From: sosnaenergyconsulting@home.com
Date: Tue, 31 Oct 2000 16:43:57 -0800
Hi Jarrid:
Of course you're right-the JH engine is 2 liters--I wasn't being clear:
I thought I'd start by measuring a JH 2 liter engine for fitment (thanx
for your response on that, by the way) and then REALLY complicate things
by trying to get hold of one of the STL 2.2 liter stroker motors which I
figured had the same external dimensions as the JH engine.  Of course I
could just simplify matters (especially after T.J. Higgins enthusiastic
endorsement) by getting a JH and stopping there--naaah, that'd be too
easy :-)

Regards
David 


Jarrid Gross wrote:
> 
> David wrote,
> 
> First of all, the lotus JH engine (907) was 2 liters, not the 2.2
> of the (910) used in the STL.  The stromberg 175cd equipped engine
> produeced roughly 130BHP in stock form, but lotus did manufacture
> a "weber" head for this series of engine, which produced more power.
> These heads seem to have made there way over, but are not original
> equipment for US based jensen exports.
> 
> The intake is on the same side as the alpine head, and the exhuast
> is on the opposite side of the head (as should be).
> 
> The engine cants significantly which alleviates the steering box
> problem in alpines (like the alpine GT/hunter setup only moreso).
> The height of the engine is greatert than the alpine due to the
> DOHC head,
> BUT...
> The engines angle is so great that it is probably shorter than the
> alpine engine after it is mounted.
> 
> Personally I think it'd fit.
> AND...
> Jenson (rootes) 4 speed + OD transmisions are very available and
> cheap as compared to alpine transmisions.
> This because the later model ZF 5 speed is coveted by JH owners.
> 
> If anyone has the interest, I have a 907 engine available to me for
> measurmeents.
> 
> Jarrid Gross
> 
> >Jan:
> >Interesting you should mention English cylinder heads.  Too bad for us
> >that the eventual Sunbeam Lotus connection didn't happen in time for our
> >cars to take advantage of it.  The (roughly) 2.2 liter twincam
> >Lotus/Jensen Healey lump put out 150 h.p. and 150 lb/ft of torque in
> >street form.  Don't know if it would fit in our cars or not since I'm
> >not sure which side the exhaust exits on and our infamous steering box
> >tends to make things difficult. Too bad the car shows have done for the
> >year or I could start checking out Jensen Healy motors.
> >
> >Regards
> >David

<Prev in Thread] Current Thread [Next in Thread>