alpines
[Top] [All Lists]

RE: Fluids etc

To: "'Tom Yang'" <TYang@compuserve.com>
Subject: RE: Fluids etc
From: Aaron Sudds <asudds@mio.ten.fujitsu.com>
Date: Tue, 26 Sep 2000 09:05:54 -0400
That is very true... I will use Mobile 1 AFTER I reseal my 911 engine this
winter... for a low temp car like the Sunbeam I will continue with dino oil.
The synt. oil has a MUCH lower viscosity all the time therefore will burn
past the rings and valve guides faster in old engines and leaks past British
seals quicker... Don't plan on switching if you exhibit these problems it
will make the oil spot on the cement bigger and you will have to top up more
often.

-----Original Message-----
From: Tom Yang [mailto:TYang@compuserve.com]
Sent: Tuesday, September 26, 2000 8:42 AM
Cc: [unknown]
Subject: Re: Fluids etc


I've also heard synthetics can sometimes cause older engines to leak more
past the seals. And at $$ a quart, do you still change the oil as often?

Tom 

Message text written by "jumpin'jan"
>bmounce@impop.bellatlantic.net wrote:
> I may:  What is the consensus about using Mobil 1 or other syn oils in
the
> engine and gearbox?  Anyone try it?  Might it help the #s 2 and 3
pistons?
> 
> Thanks, Bill


Bill,
        I think my first choice would be Mobil 1 in the transmission first
and
if I have any money left, then in the engine. Also, Red line oil makes
an excellent transmission oil that I would consider as well. I recommend
staying away from the oil additives.
Jan<

<Prev in Thread] Current Thread [Next in Thread>