--===============1784279319032484575==
--000000000000ef0b4d05d18dbb4b
Thanks Patrick. Pretty high tech connectors!
Bob Fabie
On Wed, Nov 24, 2021 at 10:47 AM David Friedlander <forzion7@gmail.com>
wrote:
> They don't give those away, do they Dave?
>
> Dave
>
> On Wed, Nov 24, 2021 at 11:25 AM DAVID MASSEY <dave1massey@cs.com> wrote:
>
>> You mean something like this:
>>
>>
>> https://www.mcmaster.com/universal-joints/constant-velocity-single-u-joints/
>>
>>
>> Dave
>>
>>
>>
>> -----Original Message-----
>> From: Patrick Bloem <patrick.bloem@sbcglobal.net>
>> To: 6pack@autox.team.net <6pack@autox.team.net>
>> Sent: Wed, Nov 24, 2021 9:53 am
>> Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7
>>
>> Many years ago I replaced my throttle linkages with a helical Flexures
>> that here being used on Indy Car engines. Not sure where you can get them
>> but I was doinf business with them back in the 90's and got same samples
>> that have worked great to this day. They are located in Ontario, CA. HC
>> Pacific <https://helicalcouplings.com/helical-u-joints.aspx>
>>
>> HC Pacific
>> Helical U-Joints from HC Pacific. Contact us for quantity discounts.
>> <https://helicalcouplings.com/helical-u-joints.aspx>
>>
>>
>>
>> J. Patrick Bloem
>> 9168 TR250
>> 1973 TR6
>>
>>
>> On Wednesday, November 24, 2021, 09:40:53 AM EST,
>> 6pack-request@autox.team.net <6pack-request@autox.team.net> wrote:
>>
>>
>> Send 6pack mailing list submissions to
>> 6pack@autox.team.net
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://autox.team.net/mailman/listinfo/6pack
>> or, via email, send a message with subject or body 'help' to
>> 6pack-request@autox.team.net
>>
>> You can reach the person managing the list at
>> 6pack-owner@autox.team.net
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of 6pack digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: Throttle Linkage ?S? Connectors (Tomislav Marincic)
>> 2. Re: Throttle Linkage ?S? Connectors (rmf3860 rmf3860)
>> 3. Re: Throttle Linkage ?S? Connectors (Jim Jones)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 24 Nov 2021 12:35:53 +0000
>> From: Tomislav Marincic <tomislav.marincic@earthlink.net>
>> To: robertrudolphi@yahoo.com, 6pack@autox.team.net
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> Message-ID: <7018a786-b1bf-d48d-329c-a523ebe9a879@earthlink.net>
>> Content-Type: text/plain; charset=utf-8
>>
>> Hello Robert,
>> ?
>> I'll snap you a photo of the barrel linkage in place. One of them works,
>> but if I recall correctly, there was no way to use two and get them
>> installed without removing the carbs?and linkage.
>> ?
>> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
>> Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and
>> keeps the header from corroding, but it won't cure your fuel cook-off
>> problems. Your best bet is one of Joe Alexander's heat shields, which I
>> think are being sold through Moss as well.
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> (
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> )
>> ?
>> https://www.summitracing.com/parts/the-11021?rrec=true (
>> https://www.summitracing.com/parts/the-11021?rrec=true)
>> ?
>> Good Luck, Tom
>> ?
>> ?
>> ?
>> ?
>> -----Original Message-----
>> From: robert rudolphi
>> Sent: Nov 23, 2021 1:23 PM
>> To: 6pack@autox.team.net , Tomislav Marincic
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> ?
>> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
>> and was thinking about have the intake and stock exhaust manifolds Jet
>> coated. I am trying to reduce hard starting when hot. Would also like to
>> get the throttle linkages re-plated/refinished and was wondering what is
>> the best way to go?
>> ?
>> Thanks in advance for any feedback
>> ?
>> Robert
>> ?
>> ?
>> ?
>> ?
>> ?
>> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>> ?
>> ?
>> ?
>> ?
>> ?
>> ?
>> When I set up my dual ZS175?s I used new link clips from Roadster
>> Factory. They quickly became distorted and introduced slop into the linkage.
>> ?
>> I?m currently using one SU link clip sourced from Richard Good, which is
>> much sturdier and more rust-resistant than the ZS part. I?m also using a
>> single rigid coupling that I sourced from Grainger. I forget why, but
>> installing two shaft linkages was problematic, and the gap between carb
>> throttle shafts was too wide to use two SU linkages.
>> ?
>> I might have one of each in my spares if you need them.
>> ?
>> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>> ?
>> https://www.goodparts.com/product/folded-coupler-carb-shaft/
>> ?
>> Pix on request?Tom
>> ?
>> ?
>> ?
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation? $12.96
>> Archive: http://www.team.net/archive
>> ?
>> ?
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>> ?
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>> ?
>>
>> ?
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Wed, 24 Nov 2021 07:49:10 -0600
>> From: rmf3860 rmf3860 <bobfabie@gmail.com>
>> To: Tomislav Marincic <tomislav.marincic@earthlink.net>
>> Cc: 6pack@autox.team.net, robertrudolphi@yahoo.com
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> Message-ID:
>> <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte_AfdEiMHbp=3=pHg@mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Thanks Tom. I have a heat deflector. I bought it many years ago.
>> Considering the slop in my throttle linkage, I decided to order a
>> replacement from Richard at Goodparts.
>>
>> Bob Fabie
>>
>> On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <
>> tomislav.marincic@earthlink.net> wrote:
>>
>> > Hello Robert,
>> >
>> > I'll snap you a photo of the barrel linkage in place. One of them works,
>> > but if I recall correctly, there was no way to use two and get them
>> > installed without removing the carbs and linkage.
>> >
>> > I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
>> > Thermo-Tec exhaust tape. The Jet Hot keeps the manifolds looking nice,
>> and
>> > keeps the header from corroding, but it won't cure your fuel cook-off
>> > problems. Your best bet is one of Joe Alexander's heat shields, which I
>> > think are being sold through Moss as well.
>> >
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> > (
>> >
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> > )
>> >
>> > https://www.summitracing.com/parts/the-11021?rrec=true (
>> > https://www.summitracing.com/parts/the-11021?rrec=true)
>> >
>> > Good Luck, Tom
>> >
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: robert rudolphi
>> > Sent: Nov 23, 2021 1:23 PM
>> > To: 6pack@autox.team.net , Tomislav Marincic
>> > Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> >
>> > To follow up on this I am having my carbs rebuilt this winter (Joe
>> Curto)
>> > and was thinking about have the intake and stock exhaust manifolds Jet
>> > coated. I am trying to reduce hard starting when hot. Would also like to
>> > get the throttle linkages re-plated/refinished and was wondering what is
>> > the best way to go?
>> >
>> > Thanks in advance for any feedback
>> >
>> > Robert
>> >
>> >
>> >
>> >
>> >
>> > On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>> >
>> >
>> >
>> >
>> >
>> >
>> > When I set up my dual ZS175?s I used new link clips from Roadster
>> Factory.
>> > They quickly became distorted and introduced slop into the linkage.
>> >
>> > I?m currently using one SU link clip sourced from Richard Good, which is
>> > much sturdier and more rust-resistant than the ZS part. I?m also using a
>> > single rigid coupling that I sourced from Grainger. I forget why, but
>> > installing two shaft linkages was problematic, and the gap between carb
>> > throttle shafts was too wide to use two SU linkages.
>> >
>> > I might have one of each in my spares if you need them.
>> >
>> >
>> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>> >
>> > https://www.goodparts.com/product/folded-coupler-carb-shaft/
>> >
>> > Pix on request?Tom
>> >
>> >
>> >
>> > _______________________________________________
>> > Support Team.Net http://www.team.net/donate.html
>> > Suggested annual donation $12.96
>> > Archive: http://www.team.net/archive
>> >
>> >
>> > 6pack@autox.team.net
>> > http://autox.team.net/mailman/listinfo/6pack
>> >
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>> >
>> >
>> >
>> > _______________________________________________
>> > Support Team.Net http://www.team.net/donate.html
>> > Suggested annual donation $12.96
>> > Archive: http://www.team.net/archive
>> >
>> >
>> > 6pack@autox.team.net
>> > http://autox.team.net/mailman/listinfo/6pack
>> >
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
>> >
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/6pack/attachments/20211124/ed838233/attachment-0001.htm
>> >
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)
>> From: Jim Jones <jimjcmo@yahoo.com>
>> To: Tomislav Marincic <tomislav.marincic@earthlink.net>,
>> <robertrudolphi@yahoo.com>, <6pack@autox.team.net>
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> Message-ID: <385333468.2961619.1637764790031@mail.yahoo.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I have a new exhaust shield available if anyone would want it. Email me
>> for price if you?re interested.
>> Jim JonesFormer ?72 6 owner
>>
>>
>> Sent from Yahoo Mail for iPad
>>
>>
>> On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marincic <
>> tomislav.marincic@earthlink.net> wrote:
>>
>> Hello Robert,
>> ?
>> I'll snap you a photo of the barrel linkage in place. One of them works,
>> but if I recall correctly, there was no way to use two and get them
>> installed without removing the carbs?and linkage.
>> ?
>> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
>> Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and
>> keeps the header from corroding, but it won't cure your fuel cook-off
>> problems. Your best bet is one of Joe Alexander's heat shields, which I
>> think are being sold through Moss as well.
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> (
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> )
>> ?
>> https://www.summitracing.com/parts/the-11021?rrec=true (
>> https://www.summitracing.com/parts/the-11021?rrec=true)
>> ?
>> Good Luck, Tom
>> ?
>> ?
>> ?
>> ?
>> -----Original Message-----
>> From: robert rudolphi
>> Sent: Nov 23, 2021 1:23 PM
>> To: 6pack@autox.team.net , Tomislav Marincic
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> ?
>> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
>> and was thinking about have the intake and stock exhaust manifolds Jet
>> coated. I am trying to reduce hard starting when hot. Would also like to
>> get the throttle linkages re-plated/refinished and was wondering what is
>> the best way to go?
>> ?
>> Thanks in advance for any feedback
>> ?
>> Robert
>> ?
>> ?
>> ?
>> ?
>> ?
>> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>> ?
>> ?
>> ?
>> ?
>> ?
>> ?
>> When I set up my dual ZS175?s I used new link clips from Roadster
>> Factory. They quickly became distorted and introduced slop into the linkage.
>> ?
>> I?m currently using one SU link clip sourced from Richard Good, which is
>> much sturdier and more rust-resistant than the ZS part. I?m also using a
>> single rigid coupling that I sourced from Grainger. I forget why, but
>> installing two shaft linkages was problematic, and the gap between carb
>> throttle shafts was too wide to use two SU linkages.
>> ?
>> I might have one of each in my spares if you need them.
>> ?
>> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>> ?
>> https://www.goodparts.com/product/folded-coupler-carb-shaft/
>> ?
>> Pix on request?Tom
>> ?
>> ?
>> ?
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation? $12.96
>> Archive: http://www.team.net/archive
>> ?
>> ?
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>> ?
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>> ?
>>
>> ?
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation? $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.com
>>
>>
>>
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/6pack/attachments/20211124/4fa9bbf6/attachment.htm
>> >
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> 6pack mailing list
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>>
>> ------------------------------
>>
>> End of 6pack Digest, Vol 81, Issue 7
>> ************************************
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/dave1massey@cs.com
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/forzion7@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
>
>
--000000000000ef0b4d05d18dbb4b
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">Thanks Patrick. Pretty high tech connectors!</div><div di=
r=3D"auto"><br></div><div dir=3D"auto">Bob Fabie</div><div><br><div class=
=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Wed, Nov 24, 2021=
at 10:47 AM David Friedlander <<a href=3D"mailto:forzion7@gmail.com";>fo=
rzion7@gmail.com</a>> wrote:<br></div><blockquote class=3D"gmail_quote" =
style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><di=
v dir=3D"ltr"><div class=3D"gmail_default" style=3D"font-family:comic sans =
ms,sans-serif;font-size:large;color:#000099">They don't give those away=
, do they Dave?</div><div class=3D"gmail_default" style=3D"font-family:comi=
c sans ms,sans-serif;font-size:large;color:#000099"><br></div><div class=3D=
"gmail_default" style=3D"font-family:comic sans ms,sans-serif;font-size:lar=
ge;color:#000099">Dave</div></div><br><div class=3D"gmail_quote"><div dir=
=3D"ltr" class=3D"gmail_attr">On Wed, Nov 24, 2021 at 11:25 AM DAVID MASSEY=
<<a href=3D"mailto:dave1massey@cs.com"; target=3D"_blank">dave1massey@cs=
.com</a>> wrote:<br></div><blockquote class=3D"gmail_quote" style=3D"mar=
gin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1=
ex">
<div style=3D"color:black;font:12pt Arial,Helvetica,sans-serif">
<div> <font size=3D"3">You mean something like this:</font></div>
<div><br>
</div>
<div><font size=3D"3"><a href=3D"https://www.mcmaster.com/universal-joints/=
constant-velocity-single-u-joints/" target=3D"_blank">https://www.mcmaster.=
com/universal-joints/constant-velocity-single-u-joints/</a></font></div>
<div><br>
</div>
<div> <br>
</div>
<div style=3D"clear:both"><font size=3D"4">Dave </font><br>
<br>
</div>
<div> <br>
</div>
<div> <br>
</div>
<div style=3D"font-family:arial,helvetica;font-size:10pt;color:black"><font=
size=3D"2">-----Original Message-----<br>
From: Patrick Bloem <<a href=3D"mailto:patrick.bloem@sbcglobal.net"; targ=
et=3D"_blank">patrick.bloem@sbcglobal.net</a>><br>
To: <a href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.t=
eam.net</a> <<a href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6=
pack@autox.team.net</a>><br>
Sent: Wed, Nov 24, 2021 9:53 am<br>
Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7<br>
<br>
<div id=3D"m_-1490347588043009174gmail-m_2866720244154362103yiv7648989835">
<div>
<div style=3D"font-family:"Helvetica Neue",Helvetica,Arial,sans-s=
erif;font-size:13px">
<div>
<div dir=3D"ltr">Many years ago I replaced my throttle linkages with a heli=
cal Flexures that here being used on Indy Car engines. Not sure where you c=
an get them but I was doinf business with them back in the 90's and got=
same samples that have worked great to this day. They are located in Ontar=
io, CA.=C2=A0<a rel=3D"nofollow noopener noreferrer" href=3D"https://helica=
lcouplings.com/helical-u-joints.aspx" target=3D"_blank">HC Pacific</a></div=
>
<div><br>
</div>
<div id=3D"m_-1490347588043009174gmail-m_2866720244154362103yiv7648989835yd=
p1ff5108aenhancr_card_8661388660" style=3D"max-width:400px;font-family:Yaho=
oSans,"Helvetica Neue","Segoe UI",Helvetica,Arial,sans-=
serif"><a rel=3D"nofollow noopener noreferrer" href=3D"https://helicalcoupl=
ings.com/helical-u-joints.aspx" style=3D"text-decoration:none;color:rgb(0,0=
,0)" target=3D"_blank"><table style=3D"max-width:400px" cellspacing=3D"0" c=
ellpadding=3D"0" border=3D"0"><tbody><tr><td width=3D"400"><table style=3D"=
max-width:400px;border-width:1px;border-style:solid;border-color:rgb(224,22=
8,233);border-radius:2px" width=3D"100%" cellspacing=3D"0" cellpadding=3D"0=
" border=3D"0"><tbody><tr><td style=3D"background-color:rgb(0,0,0);backgrou=
nd-size:cover;border-radius:2px 2px 0px 0px;min-height:175px" valign=3D"top=
" height=3D"175" bgcolor=3D"#000000"><table style=3D"width:100%" cellspacin=
g=3D"0" cellpadding=3D"0" border=3D"0"><tbody><tr><td style=3D"background-c=
olor:transparent;border-radius:2px 2px 0px 0px;min-height:175px" valign=3D"=
top" bgcolor=3D"transparent"><table style=3D"width:100%;min-height:175px" h=
eight=3D"175" border=3D"0"><tbody><tr><td style=3D"text-align:left;padding:=
15px 0px 0px 15px;vertical-align:top"></td><td style=3D"text-align:right;pa=
dding:15px 15px 0px 0px;vertical-align:top">
<div></div>
</td></tr></tbody></table></td></tr></tbody></table></td></tr><tr><td><tabl=
e style=3D"background:rgb(255,255,255);width:100%;max-width:400px;border-ra=
dius:0px 0px 2px 2px;border-top:1px solid rgb(224,228,233)" cellspacing=3D"=
0" cellpadding=3D"0" border=3D"0" align=3D"center"><tbody><tr><td style=3D"=
background-color:rgb(255,255,255);padding:16px 0px 16px 12px;vertical-align=
:top;border-radius:0px 0px 0px 2px"></td><td style=3D"vertical-align:middle=
;padding:12px 24px 16px 12px;width:99%;font-family:YahooSans,"Helvetic=
a Neue","Segoe UI",Helvetica,Arial,sans-serif;border-radius:=
0px 0px 2px"><h2 style=3D"font-size:14px;line-height:19px;margin:0px 0px 6p=
x;font-family:YahooSans,"Helvetica Neue","Segoe UI",Hel=
vetica,Arial,sans-serif;color:rgb(38,40,42);max-width:314px">HC Pacific</h2=
>
<div style=3D"font-size:12px;line-height:16px;margin:0px;color:rgb(151,155,=
167)">Helical U-Joints from HC Pacific. Contact us for quantity discounts.<=
/div>
</td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></tab=
le></a></div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>
<div dir=3D"ltr" style=3D"font-family:Helvetica,Arial,sans-serif;font-size:=
13px">J. Patrick Bloem</div>
<div dir=3D"ltr" style=3D"font-family:Helvetica,Arial,sans-serif;font-size:=
13px">9168 TR250</div>
<div dir=3D"ltr" style=3D"font-family:Helvetica,Arial,sans-serif;font-size:=
13px">1973 TR6</div>
</div>
</div>
=20
<div><br>
</div>
<div><br>
</div>
=20
</div>
<div id=3D"m_-1490347588043009174gmail-m_2866720244154362103yiv7648989835ya=
hoo_quoted_8180727951">
=20
<div style=3D"font-family:"Helvetica Neue",Helvetica,Arial,sans-s=
erif;font-size:13px;color:rgb(38,40,42)">
=20
=20
<div>
On Wednesday, November 24, 2021, 09:40:53 AM EST, <a hr=
ef=3D"mailto:6pack-request@autox.team.net"; target=3D"_blank">6pack-request@=
autox.team.net</a> <<a href=3D"mailto:6pack-request@autox.team.net"; targ=
et=3D"_blank">6pack-request@autox.team.net</a>> wrote:
</div>
=20
<div><br>
</div>
=20
<div><br>
</div>
=20
<div>
<div dir=3D"ltr">Send 6pack mailing list submissions to<br>
</div>
<div dir=3D"ltr">=C2=A0=C2=A0=C2=A0 <a rel=3D"nofollow noopener noreferrer"=
href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.team.ne=
t</a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">To subscribe or unsubscribe via the World Wide Web, visit<=
br>
</div>
<div dir=3D"ltr">=C2=A0=C2=A0=C2=A0 <a rel=3D"nofollow noopener noreferrer"=
href=3D"http://autox.team.net/mailman/listinfo/6pack"; target=3D"_blank">ht=
tp://autox.team.net/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr">or, via email, send a message with subject or body 'he=
lp' to<br>
</div>
<div dir=3D"ltr">=C2=A0=C2=A0=C2=A0 <a rel=3D"nofollow noopener noreferrer"=
href=3D"mailto:6pack-request@autox.team.net"; target=3D"_blank">6pack-reque=
st@autox.team.net</a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">You can reach the person managing the list at<br>
</div>
<div dir=3D"ltr">=C2=A0=C2=A0=C2=A0 <a rel=3D"nofollow noopener noreferrer"=
href=3D"mailto:6pack-owner@autox.team.net"; target=3D"_blank">6pack-owner@a=
utox.team.net</a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">When replying, please edit your Subject line so it is more=
specific<br>
</div>
<div dir=3D"ltr">than "Re: Contents of 6pack digest..."<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Today's Topics:<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">=C2=A0 1. Re: Throttle Linkage ?S? Connectors (Tomislav M=
arincic)<br>
</div>
<div dir=3D"ltr">=C2=A0 2. Re: Throttle Linkage ?S? Connectors (rmf3860 rm=
f3860)<br>
</div>
<div dir=3D"ltr">=C2=A0 3. Re: Throttle Linkage ?S? Connectors (Jim Jones)=
<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">----------------------------------------------------------=
------------<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Message: 1<br>
</div>
<div dir=3D"ltr">Date: Wed, 24 Nov 2021 12:35:53 +0000<br>
</div>
<div dir=3D"ltr">From: Tomislav Marincic <<a rel=3D"nofollow noopener no=
referrer" href=3D"mailto:tomislav.marincic@earthlink.net"; target=3D"_blank"=
>tomislav.marincic@earthlink.net</a>><br>
</div>
<div dir=3D"ltr">To: <a rel=3D"nofollow noopener noreferrer" href=3D"mailto=
:robertrudolphi@yahoo.com" target=3D"_blank">robertrudolphi@yahoo.com</a>, =
<a rel=3D"nofollow noopener noreferrer" href=3D"mailto:6pack@autox.team.net=
" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br>
</div>
<div dir=3D"ltr">Message-ID: <<a rel=3D"nofollow noopener noreferrer" hr=
ef=3D"mailto:7018a786-b1bf-d48d-329c-a523ebe9a879@earthlink.net"; target=3D"=
_blank">7018a786-b1bf-d48d-329c-a523ebe9a879@earthlink.net</a>><br>
</div>
<div dir=3D"ltr">Content-Type: text/plain; charset=3Dutf-8<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Hello Robert,<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I'll snap you a photo of the barrel linkage in place. =
One of them works, but if I recall correctly, there was no way to use two a=
nd get them installed without removing the carbs?and linkage.<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I Jet Hot coated both of my manifolds, and wrapped the exh=
aust header in Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds loo=
king nice, and keeps the header from corroding, but it won't cure your =
fuel cook-off problems. Your best bet is one of Joe Alexander's heat sh=
ields, which I think are being sold through Moss as well. <a rel=3D"nofollo=
w noopener noreferrer" href=3D"https://mossmotors.com/aluminum-heat-shield-=
by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree=
&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWA=
y8EAQYAiABEgKXSPD_BwE" target=3D"_blank">https://mossmotors.com/aluminum-he=
at-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_med=
ium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIV=
hcqGCh0tWAy8EAQYAiABEgKXSPD_BwE </a>(<a rel=3D"nofollow noopener noreferrer=
" href=3D"https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-s=
tromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Ds=
hopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE=
" target=3D"_blank">https://mossmotors.com/aluminum-heat-shield-by-a-r-e-fo=
r-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_ca=
mpaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABE=
gKXSPD_BwE</a>)<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"https://ww=
w.summitracing.com/parts/the-11021?rrec=3Dtrue" target=3D"_blank">https://w=
ww.summitracing.com/parts/the-11021?rrec=3Dtrue </a>(<a rel=3D"nofollow noo=
pener noreferrer" href=3D"https://www.summitracing.com/parts/the-11021?rrec=
=3Dtrue" target=3D"_blank">https://www.summitracing.com/parts/the-11021?rre=
c=3Dtrue</a>)<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Good Luck, Tom<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">-----Original Message-----<br>
</div>
<div dir=3D"ltr">From: robert rudolphi <br>
</div>
<div dir=3D"ltr">Sent: Nov 23, 2021 1:23 PM<br>
</div>
<div dir=3D"ltr">To: <a rel=3D"nofollow noopener noreferrer" href=3D"mailto=
:6pack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a> , Tomisla=
v Marincic <br>
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">To follow up on this I am having my carbs rebuilt this win=
ter (Joe Curto) and was thinking about have the intake and stock exhaust ma=
nifolds Jet coated. I am trying to reduce hard starting when hot. Would als=
o like to get the throttle linkages re-plated/refinished and was wondering =
what is the best way to go?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Thanks in advance for any feedback<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Robert<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav M=
arincic wrote:<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">When I set up my dual ZS175?s I used new link clips from R=
oadster Factory. They quickly became distorted and introduced slop into the=
linkage.<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I?m currently using one SU link clip sourced from Richard =
Good, which is much sturdier and more rust-resistant than the ZS part. I?m =
also using a single rigid coupling that I sourced from Grainger. I forget w=
hy, but installing two shaft linkages was problematic, and the gap between =
carb throttle shafts was too wide to use two SU linkages.<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I might have one of each in my spares if you need them.<br=
>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"https://ww=
w.grainger.com/search?searchQuery=3Dnomar+clx-5-5-a&searchBar=3Dtrue" t=
arget=3D"_blank">https://www.grainger.com/search?searchQuery=3Dnomar+clx-5-=
5-a&searchBar=3Dtrue</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"https://ww=
w.goodparts.com/product/folded-coupler-carb-shaft/" target=3D"_blank">https=
://www.goodparts.com/product/folded-coupler-carb-shaft/</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Pix on request?Tom<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">_______________________________________________<br>
</div>
<div dir=3D"ltr">Support Team.Net <a rel=3D"nofollow noopener noreferrer" h=
ref=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.team.n=
et/donate.html</a><br>
</div>
<div dir=3D"ltr">Suggested annual donation? $12.96<br>
</div>
<div dir=3D"ltr">Archive: <a rel=3D"nofollow noopener noreferrer" href=3D"h=
ttp://www.team.net/archive" target=3D"_blank">http://www.team.net/archive</=
a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"mailto:6pa=
ck@autox.team.net" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"http://aut=
ox.team.net/mailman/listinfo/6pack" target=3D"_blank">http://autox.team.net=
/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Unsubscribe/Manage: <a rel=3D"nofollow noopener noreferrer=
" href=3D"http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.=
com" target=3D"_blank">http://autox.team.net/mailman/options/6pack/robertru=
dolphi@yahoo.com</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">------------------------------<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Message: 2<br>
</div>
<div dir=3D"ltr">Date: Wed, 24 Nov 2021 07:49:10 -0600<br>
</div>
<div dir=3D"ltr">From: rmf3860 rmf3860 <<a rel=3D"nofollow noopener nore=
ferrer" href=3D"mailto:bobfabie@gmail.com"; target=3D"_blank">bobfabie@gmail=
.com</a>><br>
</div>
<div dir=3D"ltr">To: Tomislav Marincic <<a rel=3D"nofollow noopener nore=
ferrer" href=3D"mailto:tomislav.marincic@earthlink.net"; target=3D"_blank">t=
omislav.marincic@earthlink.net</a>><br>
</div>
<div dir=3D"ltr">Cc: <a rel=3D"nofollow noopener noreferrer" href=3D"mailto=
:6pack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a>, <a rel=
=3D"nofollow noopener noreferrer" href=3D"mailto:robertrudolphi@yahoo.com"; =
target=3D"_blank">robertrudolphi@yahoo.com</a><br>
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br>
</div>
<div dir=3D"ltr">Message-ID:<br>
</div>
<div dir=3D"ltr">=C2=A0=C2=A0=C2=A0 <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte=
_AfdEiMHbp=3D3=3D<a rel=3D"nofollow noopener noreferrer" href=3D"mailto:pHg=
@mail.gmail.com" target=3D"_blank">pHg@mail.gmail.com</a>><br>
</div>
<div dir=3D"ltr">Content-Type: text/plain; charset=3D"utf-8"<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Thanks Tom. I have a heat deflector. I bought it many year=
s ago.<br>
</div>
<div dir=3D"ltr">Considering the slop in my throttle linkage, I decided to =
order a<br>
</div>
<div dir=3D"ltr">replacement from Richard at Goodparts.<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Bob Fabie<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"mailto:tom=
islav.marincic@earthlink.net" target=3D"_blank">tomislav.marincic@earthlink=
.net</a>> wrote:<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">> Hello Robert,<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> I'll snap you a photo of the barrel linkage in pl=
ace. One of them works,<br>
</div>
<div dir=3D"ltr">> but if I recall correctly, there was no way to use tw=
o and get them<br>
</div>
<div dir=3D"ltr">> installed without removing the carbs and linkage.<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> I Jet Hot coated both of my manifolds, and wrapped th=
e exhaust header in<br>
</div>
<div dir=3D"ltr">> Thermo-Tec exhaust tape. The Jet Hot keeps the manifo=
lds looking nice, and<br>
</div>
<div dir=3D"ltr">> keeps the header from corroding, but it won't cur=
e your fuel cook-off<br>
</div>
<div dir=3D"ltr">> problems. Your best bet is one of Joe Alexander's=
heat shields, which I<br>
</div>
<div dir=3D"ltr">> think are being sold through Moss as well.<br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"https=
://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?=
utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshopping&gcl=
id=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE" target=3D"_bl=
ank">https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromb=
erg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshoppi=
ng&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE</a><=
br>
</div>
<div dir=3D"ltr">> (<br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"https=
://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?=
utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshopping&gcl=
id=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE" target=3D"_bl=
ank">https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromb=
erg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshoppi=
ng&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE</a><=
br>
</div>
<div dir=3D"ltr">> )<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"https=
://www.summitracing.com/parts/the-11021?rrec=3Dtrue" target=3D"_blank">http=
s://www.summitracing.com/parts/the-11021?rrec=3Dtrue </a>(<br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"https=
://www.summitracing.com/parts/the-11021?rrec=3Dtrue" target=3D"_blank">http=
s://www.summitracing.com/parts/the-11021?rrec=3Dtrue</a>)<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> Good Luck, Tom<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> -----Original Message-----<br>
</div>
<div dir=3D"ltr">> From: robert rudolphi<br>
</div>
<div dir=3D"ltr">> Sent: Nov 23, 2021 1:23 PM<br>
</div>
<div dir=3D"ltr">> To: <a rel=3D"nofollow noopener noreferrer" href=3D"m=
ailto:6pack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a> , To=
mislav Marincic<br>
</div>
<div dir=3D"ltr">> Subject: Re: [6pack] Throttle Linkage ?S? Connectors<=
br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> To follow up on this I am having my carbs rebuilt thi=
s winter (Joe Curto)<br>
</div>
<div dir=3D"ltr">> and was thinking about have the intake and stock exha=
ust manifolds Jet<br>
</div>
<div dir=3D"ltr">> coated. I am trying to reduce hard starting when hot.=
Would also like to<br>
</div>
<div dir=3D"ltr">> get the throttle linkages re-plated/refinished and wa=
s wondering what is<br>
</div>
<div dir=3D"ltr">> the best way to go?<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> Thanks in advance for any feedback<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> Robert<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomis=
lav Marincic wrote:<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> When I set up my dual ZS175?s I used new link clips f=
rom Roadster Factory.<br>
</div>
<div dir=3D"ltr">> They quickly became distorted and introduced slop int=
o the linkage.<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> I?m currently using one SU link clip sourced from Ric=
hard Good, which is<br>
</div>
<div dir=3D"ltr">> much sturdier and more rust-resistant than the ZS par=
t. I?m also using a<br>
</div>
<div dir=3D"ltr">> single rigid coupling that I sourced from Grainger. I=
forget why, but<br>
</div>
<div dir=3D"ltr">> installing two shaft linkages was problematic, and th=
e gap between carb<br>
</div>
<div dir=3D"ltr">> throttle shafts was too wide to use two SU linkages.<=
br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> I might have one of each in my spares if you need the=
m.<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"https=
://www.grainger.com/search?searchQuery=3Dnomar+clx-5-5-a&searchBar=3Dtr=
ue" target=3D"_blank">https://www.grainger.com/search?searchQuery=3Dnomar+c=
lx-5-5-a&searchBar=3Dtrue</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"https=
://www.goodparts.com/product/folded-coupler-carb-shaft/" target=3D"_blank">=
https://www.goodparts.com/product/folded-coupler-carb-shaft/</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> Pix on request?Tom<br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> _______________________________________________<br>
</div>
<div dir=3D"ltr">> Support Team.Net <a rel=3D"nofollow noopener noreferr=
er" href=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.t=
eam.net/donate.html</a><br>
</div>
<div dir=3D"ltr">> Suggested annual donation=C2=A0 $12.96<br>
</div>
<div dir=3D"ltr">> Archive: <a rel=3D"nofollow noopener noreferrer" href=
=3D"http://www.team.net/archive"; target=3D"_blank">http://www.team.net/arch=
ive</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"mailt=
o:6pack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"http:=
//autox.team.net/mailman/listinfo/6pack" target=3D"_blank">http://autox.tea=
m.net/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> Unsubscribe/Manage:<br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"http:=
//autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com" target=3D"=
_blank">http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.co=
m</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> _______________________________________________<br>
</div>
<div dir=3D"ltr">> Support Team.Net <a rel=3D"nofollow noopener noreferr=
er" href=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.t=
eam.net/donate.html</a><br>
</div>
<div dir=3D"ltr">> Suggested annual donation=C2=A0 $12.96<br>
</div>
<div dir=3D"ltr">> Archive: <a rel=3D"nofollow noopener noreferrer" href=
=3D"http://www.team.net/archive"; target=3D"_blank">http://www.team.net/arch=
ive</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"mailt=
o:6pack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"http:=
//autox.team.net/mailman/listinfo/6pack" target=3D"_blank">http://autox.tea=
m.net/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">> Unsubscribe/Manage:<br>
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" href=3D"http:=
//autox.team.net/mailman/options/6pack/bobfabie@gmail.com" target=3D"_blank=
">http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com</a><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">><br>
</div>
<div dir=3D"ltr">-------------- next part --------------<br>
</div>
<div dir=3D"ltr">An HTML attachment was scrubbed...<br>
</div>
<div dir=3D"ltr">URL: <<a rel=3D"nofollow noopener noreferrer" href=3D"h=
ttp://autox.team.net/pipermail/6pack/attachments/20211124/ed838233/attachme=
nt-0001.htm" target=3D"_blank">http://autox.team.net/pipermail/6pack/attach=
ments/20211124/ed838233/attachment-0001.htm</a>><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">------------------------------<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Message: 3<br>
</div>
<div dir=3D"ltr">Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)<br>
</div>
<div dir=3D"ltr">From: Jim Jones <<a rel=3D"nofollow noopener noreferrer=
" href=3D"mailto:jimjcmo@yahoo.com"; target=3D"_blank">jimjcmo@yahoo.com</a>=
><br>
</div>
<div dir=3D"ltr">To: Tomislav Marincic <<a rel=3D"nofollow noopener nore=
ferrer" href=3D"mailto:tomislav.marincic@earthlink.net"; target=3D"_blank">t=
omislav.marincic@earthlink.net</a>>,<br>
</div>
<div dir=3D"ltr">=C2=A0=C2=A0=C2=A0 <<a rel=3D"nofollow noopener norefer=
rer" href=3D"mailto:robertrudolphi@yahoo.com"; target=3D"_blank">robertrudol=
phi@yahoo.com</a>>,=C2=A0 <<a rel=3D"nofollow noopener noreferrer" hr=
ef=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.team.net</=
a>><br>
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br>
</div>
<div dir=3D"ltr">Message-ID: <<a rel=3D"nofollow noopener noreferrer" hr=
ef=3D"mailto:385333468.2961619.1637764790031@mail.yahoo.com"; target=3D"_bla=
nk">385333468.2961619.1637764790031@mail.yahoo.com</a>><br>
</div>
<div dir=3D"ltr">Content-Type: text/plain; charset=3D"utf-8"<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">I have a new exhaust shield available if anyone would want=
it. Email me for price if you?re interested.<br>
</div>
<div dir=3D"ltr">Jim JonesFormer ?72 6 owner<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Sent from Yahoo Mail for iPad<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marinci=
c <<a rel=3D"nofollow noopener noreferrer" href=3D"mailto:tomislav.marin=
cic@earthlink.net" target=3D"_blank">tomislav.marincic@earthlink.net</a>>=
; wrote:<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Hello Robert,<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I'll snap you a photo of the barrel linkage in place. =
One of them works, but if I recall correctly, there was no way to use two a=
nd get them installed without removing the carbs?and linkage.<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I Jet Hot coated both of my manifolds, and wrapped the exh=
aust header in Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds loo=
king nice, and keeps the header from corroding, but it won't cure your =
fuel cook-off problems. Your best bet is one of Joe Alexander's heat sh=
ields, which I think are being sold through Moss as well. <a rel=3D"nofollo=
w noopener noreferrer" href=3D"https://mossmotors.com/aluminum-heat-shield-=
by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree=
&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWA=
y8EAQYAiABEgKXSPD_BwE" target=3D"_blank">https://mossmotors.com/aluminum-he=
at-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_med=
ium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIV=
hcqGCh0tWAy8EAQYAiABEgKXSPD_BwE </a>(<a rel=3D"nofollow noopener noreferrer=
" href=3D"https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-s=
tromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Ds=
hopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE=
" target=3D"_blank">https://mossmotors.com/aluminum-heat-shield-by-a-r-e-fo=
r-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_ca=
mpaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABE=
gKXSPD_BwE</a>)<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"https://ww=
w.summitracing.com/parts/the-11021?rrec=3Dtrue" target=3D"_blank">https://w=
ww.summitracing.com/parts/the-11021?rrec=3Dtrue </a>(<a rel=3D"nofollow noo=
pener noreferrer" href=3D"https://www.summitracing.com/parts/the-11021?rrec=
=3Dtrue" target=3D"_blank">https://www.summitracing.com/parts/the-11021?rre=
c=3Dtrue</a>)<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Good Luck, Tom<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">-----Original Message-----<br>
</div>
<div dir=3D"ltr">From: robert rudolphi <br>
</div>
<div dir=3D"ltr">Sent: Nov 23, 2021 1:23 PM<br>
</div>
<div dir=3D"ltr">To: <a rel=3D"nofollow noopener noreferrer" href=3D"mailto=
:6pack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a> , Tomisla=
v Marincic <br>
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">To follow up on this I am having my carbs rebuilt this win=
ter (Joe Curto) and was thinking about have the intake and stock exhaust ma=
nifolds Jet coated. I am trying to reduce hard starting when hot. Would als=
o like to get the throttle linkages re-plated/refinished and was wondering =
what is the best way to go?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Thanks in advance for any feedback<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Robert<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav M=
arincic wrote:<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">When I set up my dual ZS175?s I used new link clips from R=
oadster Factory. They quickly became distorted and introduced slop into the=
linkage.<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I?m currently using one SU link clip sourced from Richard =
Good, which is much sturdier and more rust-resistant than the ZS part. I?m =
also using a single rigid coupling that I sourced from Grainger. I forget w=
hy, but installing two shaft linkages was problematic, and the gap between =
carb throttle shafts was too wide to use two SU linkages.<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">I might have one of each in my spares if you need them.<br=
>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"https://ww=
w.grainger.com/search?searchQuery=3Dnomar+clx-5-5-a&searchBar=3Dtrue" t=
arget=3D"_blank">https://www.grainger.com/search?searchQuery=3Dnomar+clx-5-=
5-a&searchBar=3Dtrue</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"https://ww=
w.goodparts.com/product/folded-coupler-carb-shaft/" target=3D"_blank">https=
://www.goodparts.com/product/folded-coupler-carb-shaft/</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Pix on request?Tom<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">_______________________________________________<br>
</div>
<div dir=3D"ltr">Support Team.Net <a rel=3D"nofollow noopener noreferrer" h=
ref=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.team.n=
et/donate.html</a><br>
</div>
<div dir=3D"ltr">Suggested annual donation? $12.96<br>
</div>
<div dir=3D"ltr">Archive: <a rel=3D"nofollow noopener noreferrer" href=3D"h=
ttp://www.team.net/archive" target=3D"_blank">http://www.team.net/archive</=
a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"mailto:6pa=
ck@autox.team.net" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"http://aut=
ox.team.net/mailman/listinfo/6pack" target=3D"_blank">http://autox.team.net=
/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">Unsubscribe/Manage: <a rel=3D"nofollow noopener noreferrer=
" href=3D"http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.=
com" target=3D"_blank">http://autox.team.net/mailman/options/6pack/robertru=
dolphi@yahoo.com</a><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">?<br>
</div>
<div dir=3D"ltr">_______________________________________________<br>
</div>
<div dir=3D"ltr">Support Team.Net <a rel=3D"nofollow noopener noreferrer" h=
ref=3D"http://www.team.net/donate.html"; target=3D"_blank">http://www.team.n=
et/donate.html</a><br>
</div>
<div dir=3D"ltr">Suggested annual donation? $12.96<br>
</div>
<div dir=3D"ltr">Archive: <a rel=3D"nofollow noopener noreferrer" href=3D"h=
ttp://www.team.net/archive" target=3D"_blank">http://www.team.net/archive</=
a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"mailto:6pa=
ck@autox.team.net" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"http://aut=
ox.team.net/mailman/listinfo/6pack" target=3D"_blank">http://autox.team.net=
/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Unsubscribe/Manage: <a rel=3D"nofollow noopener noreferrer=
" href=3D"http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.com"; ta=
rget=3D"_blank">http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.c=
om</a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">-------------- next part --------------<br>
</div>
<div dir=3D"ltr">An HTML attachment was scrubbed...<br>
</div>
<div dir=3D"ltr">URL: <<a rel=3D"nofollow noopener noreferrer" href=3D"h=
ttp://autox.team.net/pipermail/6pack/attachments/20211124/4fa9bbf6/attachme=
nt.htm" target=3D"_blank">http://autox.team.net/pipermail/6pack/attachments=
/20211124/4fa9bbf6/attachment.htm</a>><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">------------------------------<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">Subject: Digest Footer<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">_______________________________________________<br>
</div>
<div dir=3D"ltr">6pack mailing list<br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"mailto:6pa=
ck@autox.team.net" target=3D"_blank">6pack@autox.team.net</a><br>
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" href=3D"http://aut=
ox.team.net/mailman/listinfo/6pack" target=3D"_blank">http://autox.team.net=
/mailman/listinfo/6pack</a><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">------------------------------<br>
</div>
<div dir=3D"ltr"><br>
</div>
<div dir=3D"ltr">End of 6pack Digest, Vol 81, Issue 7<br>
</div>
<div dir=3D"ltr">************************************<br>
</div>
</div>
</div>
</div>
</div>
</div>
_______________________________________________<br>
nk">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/archive"; target=3D"_blank">http://w=
ww.team.net/archive</a><br>
<br>
<br>
<a href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.team.=
net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/6pack"; target=3D"_blank">=
http://autox.team.net/mailman/listinfo/6pack</a><br>
<br>
dave1massey@cs.com" target=3D"_blank">http://autox.team.net/mailman/options=
/6pack/dave1massey@cs.com</a><br>
<br>
</font></div>
</div>
_______________________________________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=
=3D"_blank">http://www.team.net/archive</a><br>
<br>
<br>
<a href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.team.=
net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/6pack"; rel=3D"noreferrer"=
target=3D"_blank">http://autox.team.net/mailman/listinfo/6pack</a><br>
<br>
forzion7@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team.=
net/mailman/options/6pack/forzion7@gmail.com</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=
=3D"_blank">http://www.team.net/archive</a><br>
<br>
<br>
<a href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.team.=
net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/6pack"; rel=3D"noreferrer"=
target=3D"_blank">http://autox.team.net/mailman/listinfo/6pack</a><br>
<br>
bobfabie@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team.=
net/mailman/options/6pack/bobfabie@gmail.com</a><br>
<br>
</blockquote></div></div>
--000000000000ef0b4d05d18dbb4b--
--===============1784279319032484575==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
--===============1784279319032484575==--
|