--===============7019024152922148782==
boundary="----=_Part_1010942_732646363.1637778875753"
------=_Part_1010942_732646363.1637778875753
Content-Transfer-Encoding: quoted-printable
Considering how much money we piss away on these cars it's a drop in the b=
ucket.
=20
Dave=20
=20
=20
-----Original Message-----
From: David Friedlander <forzion7@gmail.com>
To: DAVID MASSEY <dave1massey@cs.com>
Cc: patrick.bloem@sbcglobal.net <patrick.bloem@sbcglobal.net>; 6pack@autox.=
team.net <6pack@autox.team.net>
Sent: Wed, Nov 24, 2021 10:47 am
Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7
They don't give those away, do they Dave?
Dave
On Wed, Nov 24, 2021 at 11:25 AM DAVID MASSEY <dave1massey@cs.com> wrote:
You mean something like this:
https://www.mcmaster.com/universal-joints/constant-velocity-single-u-joints=
/
=20
Dave=20
=20
=20
-----Original Message-----
From: Patrick Bloem <patrick.bloem@sbcglobal.net>
To: 6pack@autox.team.net <6pack@autox.team.net>
Sent: Wed, Nov 24, 2021 9:53 am
Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7
Many years ago I replaced my throttle linkages with a helical Flexures that=
here being used on Indy Car engines. Not sure where you can get them but I=
was doinf business with them back in the 90's and got same samples that ha=
ve worked great to this day. They are located in Ontario, CA.=C2=A0HC Pacif=
ic
|=20
|=20
|=20
| | |
|
|
|=20
| |=20
HC Pacific
Helical U-Joints from HC Pacific. Contact us for quantity discounts. |
|
|
J. Patrick Bloem9168 TR2501973 TR6=20
On Wednesday, November 24, 2021, 09:40:53 AM EST, 6pack-request@autox.t=
eam.net <6pack-request@autox.team.net> wrote: =20
=20
Send 6pack mailing list submissions to
=C2=A0=C2=A0=C2=A0 6pack@autox.team.net
To subscribe or unsubscribe via the World Wide Web, visit
=C2=A0=C2=A0=C2=A0 http://autox.team.net/mailman/listinfo/6pack
or, via email, send a message with subject or body 'help' to
=C2=A0=C2=A0=C2=A0 6pack-request@autox.team.net
You can reach the person managing the list at
=C2=A0=C2=A0=C2=A0 6pack-owner@autox.team.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of 6pack digest..."
Today's Topics:
=C2=A0 1. Re: Throttle Linkage ?S? Connectors (Tomislav Marincic)
=C2=A0 2. Re: Throttle Linkage ?S? Connectors (rmf3860 rmf3860)
=C2=A0 3. Re: Throttle Linkage ?S? Connectors (Jim Jones)
----------------------------------------------------------------------
Message: 1
Date: Wed, 24 Nov 2021 12:35:53 +0000
From: Tomislav Marincic <tomislav.marincic@earthlink.net>
To: robertrudolphi@yahoo.com, 6pack@autox.team.net
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
Hello Robert,
?
I'll snap you a photo of the barrel linkage in place. One of them works, bu=
t if I recall correctly, there was no way to use two and get them installed=
without removing the carbs?and linkage.
?
I Jet Hot coated both of my manifolds, and wrapped the exhaust header in Th=
ermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and ke=
eps the header from corroding, but it won't cure your fuel cook-off problem=
s. Your best bet is one of Joe Alexander's heat shields, which I think are =
being sold through Moss as well. https://mossmotors.com/aluminum-heat-shiel=
d-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&u=
tm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiAB=
EgKXSPD_BwE (https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenit=
h-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshoppi=
ng&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE)
?
https://www.summitracing.com/parts/the-11021?rrec=3Dtrue (https://www.summi=
tracing.com/parts/the-11021?rrec=3Dtrue)
?
Good Luck, Tom
?
?
?
?
-----Original Message-----
From: robert rudolphi=20
Sent: Nov 23, 2021 1:23 PM
To: 6pack@autox.team.net , Tomislav Marincic=20
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
?
To follow up on this I am having my carbs rebuilt this winter (Joe Curto) a=
nd was thinking about have the intake and stock exhaust manifolds Jet coate=
d. I am trying to reduce hard starting when hot. Would also like to get the=
throttle linkages re-plated/refinished and was wondering what is the best =
way to go?
?
Thanks in advance for any feedback
?
Robert
?
?
?
?
?
On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
?
?
?
?
?
?
When I set up my dual ZS175?s I used new link clips from Roadster Factory. =
They quickly became distorted and introduced slop into the linkage.
?
I?m currently using one SU link clip sourced from Richard Good, which is mu=
ch sturdier and more rust-resistant than the ZS part. I?m also using a sing=
le rigid coupling that I sourced from Grainger. I forget why, but installin=
g two shaft linkages was problematic, and the gap between carb throttle sha=
fts was too wide to use two SU linkages.
?
I might have one of each in my spares if you need them.
?
https://www.grainger.com/search?searchQuery=3Dnomar+clx-5-5-a&searchBar=3Dt=
rue
?
https://www.goodparts.com/product/folded-coupler-carb-shaft/
?
Pix on request?Tom
?
?
?
_______________________________________________
Archive: http://www.team.net/archive
?
?
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
?
phi@yahoo.com
?
?
------------------------------
Message: 2
Date: Wed, 24 Nov 2021 07:49:10 -0600
From: rmf3860 rmf3860 <bobfabie@gmail.com>
To: Tomislav Marincic <tomislav.marincic@earthlink.net>
Cc: 6pack@autox.team.net, robertrudolphi@yahoo.com
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
Message-ID:
=C2=A0=C2=A0=C2=A0 <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte_AfdEiMHbp=3D3=3DpHg=
@mail.gmail.com>
Thanks Tom. I have a heat deflector. I bought it many years ago.
Considering the slop in my throttle linkage, I decided to order a
replacement from Richard at Goodparts.
Bob Fabie
On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <
tomislav.marincic@earthlink.net> wrote:
> Hello Robert,
>
> I'll snap you a photo of the barrel linkage in place. One of them works,
> but if I recall correctly, there was no way to use two and get them
> installed without removing the carbs and linkage.
>
> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
> Thermo-Tec exhaust tape. The Jet Hot keeps the manifolds looking nice, an=
d
> keeps the header from corroding, but it won't cure your fuel cook-off
> problems. Your best bet is one of Joe Alexander's heat shields, which I
> think are being sold through Moss as well.
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg=
-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3D=
EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> (
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg=
-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3D=
EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> )
>
> https://www.summitracing.com/parts/the-11021?rrec=3Dtrue (
> https://www.summitracing.com/parts/the-11021?rrec=3Dtrue)
>
> Good Luck, Tom
>
>
>
>
> -----Original Message-----
> From: robert rudolphi
> Sent: Nov 23, 2021 1:23 PM
> To: 6pack@autox.team.net , Tomislav Marincic
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>
> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
> and was thinking about have the intake and stock exhaust manifolds Jet
> coated. I am trying to reduce hard starting when hot. Would also like to
> get the throttle linkages re-plated/refinished and was wondering what is
> the best way to go?
>
> Thanks in advance for any feedback
>
> Robert
>
>
>
>
>
> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>
>
>
>
>
>
> When I set up my dual ZS175?s I used new link clips from Roadster Factory=
.
> They quickly became distorted and introduced slop into the linkage.
>
> I?m currently using one SU link clip sourced from Richard Good, which is
> much sturdier and more rust-resistant than the ZS part. I?m also using a
> single rigid coupling that I sourced from Grainger. I forget why, but
> installing two shaft linkages was problematic, and the gap between carb
> throttle shafts was too wide to use two SU linkages.
>
> I might have one of each in my spares if you need them.
>
> https://www.grainger.com/search?searchQuery=3Dnomar+clx-5-5-a&searchBar=
=3Dtrue
>
> https://www.goodparts.com/product/folded-coupler-carb-shaft/
>
> Pix on request?Tom
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation=C2=A0 $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation=C2=A0 $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/ed838233/a=
ttachment-0001.htm>
------------------------------
Message: 3
Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)
From: Jim Jones <jimjcmo@yahoo.com>
To: Tomislav Marincic <tomislav.marincic@earthlink.net>,
=C2=A0=C2=A0=C2=A0 <robertrudolphi@yahoo.com>,=C2=A0 <6pack@autox.team.net>
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
I have a new exhaust shield available if anyone would want it. Email me for=
price if you?re interested.
Jim JonesFormer ?72 6 owner
Sent from Yahoo Mail for iPad
On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marincic <tomislav.marin=
cic@earthlink.net> wrote:
Hello Robert,
?
I'll snap you a photo of the barrel linkage in place. One of them works, bu=
t if I recall correctly, there was no way to use two and get them installed=
without removing the carbs?and linkage.
?
I Jet Hot coated both of my manifolds, and wrapped the exhaust header in Th=
ermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and ke=
eps the header from corroding, but it won't cure your fuel cook-off problem=
s. Your best bet is one of Joe Alexander's heat shields, which I think are =
being sold through Moss as well. https://mossmotors.com/aluminum-heat-shiel=
d-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&u=
tm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiAB=
EgKXSPD_BwE (https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenit=
h-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_campaign=3Dshoppi=
ng&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE)
?
https://www.summitracing.com/parts/the-11021?rrec=3Dtrue (https://www.summi=
tracing.com/parts/the-11021?rrec=3Dtrue)
?
Good Luck, Tom
?
?
?
?
-----Original Message-----
From: robert rudolphi=20
Sent: Nov 23, 2021 1:23 PM
To: 6pack@autox.team.net , Tomislav Marincic=20
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
?
To follow up on this I am having my carbs rebuilt this winter (Joe Curto) a=
nd was thinking about have the intake and stock exhaust manifolds Jet coate=
d. I am trying to reduce hard starting when hot. Would also like to get the=
throttle linkages re-plated/refinished and was wondering what is the best =
way to go?
?
Thanks in advance for any feedback
?
Robert
?
?
?
?
?
On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
?
?
?
?
?
?
When I set up my dual ZS175?s I used new link clips from Roadster Factory. =
They quickly became distorted and introduced slop into the linkage.
?
I?m currently using one SU link clip sourced from Richard Good, which is mu=
ch sturdier and more rust-resistant than the ZS part. I?m also using a sing=
le rigid coupling that I sourced from Grainger. I forget why, but installin=
g two shaft linkages was problematic, and the gap between carb throttle sha=
fts was too wide to use two SU linkages.
?
I might have one of each in my spares if you need them.
?
https://www.grainger.com/search?searchQuery=3Dnomar+clx-5-5-a&searchBar=3Dt=
rue
?
https://www.goodparts.com/product/folded-coupler-carb-shaft/
?
Pix on request?Tom
?
?
?
_______________________________________________
Archive: http://www.team.net/archive
?
?
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
?
phi@yahoo.com
?
?
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
oo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/4fa9bbf6/a=
ttachment.htm>
------------------------------
Subject: Digest Footer
_______________________________________________
6pack mailing list
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
------------------------------
End of 6pack Digest, Vol 81, Issue 7
************************************
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
@cs.com
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
ail.com
------=_Part_1010942_732646363.1637778875753
Content-Transfer-Encoding: quoted-printable
<div style=3D"color:black;font: 12pt Arial, Helvetica, sans-serif;">
<div> <font size=3D"3">Considering how much money we piss away on these car=
s it's a drop in the bucket.</font><br>
</div>
<div> <br>
</div>
<div style=3D"clear:both"><font size=3D"4">Dave </font><br>
<br>
</div>
<div> <br>
</div>
<div> <br>
</div>
<div style=3D"font-family:arial,helvetica;font-size:10pt;color:black"><font=
size=3D"2">-----Original Message-----<br>
From: David Friedlander <forzion7@gmail.com><br>
To: DAVID MASSEY <dave1massey@cs.com><br>
Cc: patrick.bloem@sbcglobal.net <patrick.bloem@sbcglobal.net>; 6pack@=
autox.team.net <6pack@autox.team.net><br>
Sent: Wed, Nov 24, 2021 10:47 am<br>
Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7<br>
<br>
<div id=3D"yiv6209564168">
<div>
<div dir=3D"ltr">
<div style=3D"font-family:comic sans ms, sans-serif;font-size:large;color:#=
000099;" class=3D"yiv6209564168gmail_default">They don't give those away, d=
o they Dave?</div>
<div style=3D"font-family:comic sans ms, sans-serif;font-size:large;color:#=
000099;" class=3D"yiv6209564168gmail_default"><br clear=3D"none"></div>
<div style=3D"font-family:comic sans ms, sans-serif;font-size:large;color:#=
000099;" class=3D"yiv6209564168gmail_default">Dave</div>
</div>
<br clear=3D"none">
<div class=3D"yiv6209564168gmail_quote">
<div id=3D"yiv6209564168yqt06969" class=3D"yiv6209564168yqt5002073828">
<div dir=3D"ltr" class=3D"yiv6209564168gmail_attr">On Wed, Nov 24, 2021 at =
11:25 AM DAVID MASSEY <<a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" ymailto=3D"mailto:dave1massey@cs.com" target=3D"_blank" href=3D"mailt=
o:dave1massey@cs.com">dave1massey@cs.com</a>> wrote:<br clear=3D"none"><=
/div>
<blockquote style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204=
,204,204);padding-left:1ex;" class=3D"yiv6209564168gmail_quote">
<div style=3D"color:black;font:12pt Arial, Helvetica, sans-serif;">
<div> <font size=3D"3">You mean something like this:</font></div>
<div><br clear=3D"none">
</div>
<div><font size=3D"3"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://www.mcmaster.com/universal-joints/const=
ant-velocity-single-u-joints/">https://www.mcmaster.com/universal-joints/co=
nstant-velocity-single-u-joints/</a></font></div>
<div><br clear=3D"none">
</div>
<div> <br clear=3D"none">
</div>
<div style=3D"clear:both;"><font size=3D"4">Dave </font><br clear=3D"none">
<br clear=3D"none">
</div>
<div> <br clear=3D"none">
</div>
<div> <br clear=3D"none">
</div>
<div style=3D"font-family:arial, helvetica;font-size:10pt;color:black;"><fo=
nt size=3D"2">-----Original Message-----<br clear=3D"none">
From: Patrick Bloem <<a rel=3D"nofollow noopener noreferrer" shape=3D"re=
ct" ymailto=3D"mailto:patrick.bloem@sbcglobal.net" target=3D"_blank" href=
=3D"mailto:patrick.bloem@sbcglobal.net">patrick.bloem@sbcglobal.net</a>>=
<br clear=3D"none">
To: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" ymailto=3D"mailt=
o:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack@autox.team.n=
et">6pack@autox.team.net</a> <<a rel=3D"nofollow noopener noreferrer" sh=
ape=3D"rect" ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=
=3D"mailto:6pack@autox.team.net">6pack@autox.team.net</a>><br clear=3D"n=
one">
Sent: Wed, Nov 24, 2021 9:53 am<br clear=3D"none">
Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7<br clear=3D"none">
<br clear=3D"none">
</font>
<div id=3D"yiv6209564168gmail-m_2866720244154362103yiv7648989835">
<div>
<div style=3D"font-family:Helvetica, Arial, sans-serif;font-size:13px;">
<div>
<div dir=3D"ltr">Many years ago I replaced my throttle linkages with a heli=
cal Flexures that here being used on Indy Car engines. Not sure where you c=
an get them but I was doinf business with them back in the 90's and got sam=
e samples that have worked great to this day. They are located in Ontario, =
CA. <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_=
blank" href=3D"https://helicalcouplings.com/helical-u-joints.aspx">HC Pacif=
ic</a></div>
<div><br clear=3D"none">
</div>
<div id=3D"yiv6209564168gmail-m_2866720244154362103yiv7648989835ydp1ff5108a=
enhancr_card_8661388660" style=3D"max-width:400px;font-family:YahooSans, He=
lvetica, Arial, sans-serif;"><a rel=3D"nofollow noopener noreferrer" shape=
=3D"rect" target=3D"_blank" href=3D"https://helicalcouplings.com/helical-u-=
joints.aspx" style=3D"text-decoration:none;color:rgb(0,0,0);"><table style=
=3D"max-width:400px;" cellspacing=3D"0" cellpadding=3D"0" border=3D"0"><tbo=
dy><tr><td colspan=3D"1" rowspan=3D"1" width=3D"400"><table style=3D"max-wi=
dth:400px;border-width:1px;border-style:solid;border-color:rgb(224,228,233)=
;border-radius:2px;" width=3D"100%" cellspacing=3D"0" cellpadding=3D"0" bor=
der=3D"0"><tbody><tr><td colspan=3D"1" rowspan=3D"1" style=3D"background-co=
lor:rgb(0,0,0);background-size:cover;border-radius:2px 2px 0px 0px;min-heig=
ht:175px;" valign=3D"top" height=3D"175" bgcolor=3D"#000000"><table style=
=3D"width:100%;" cellspacing=3D"0" cellpadding=3D"0" border=3D"0"><tbody><t=
r><td colspan=3D"1" rowspan=3D"1" style=3D"background-color:transparent;bor=
der-radius:2px 2px 0px 0px;min-height:175px;" valign=3D"top" bgcolor=3D"tra=
nsparent"><table style=3D"width:100%;min-height:175px;" height=3D"175" bord=
er=3D"0"><tbody><tr><td colspan=3D"1" rowspan=3D"1" style=3D"text-align:lef=
t;padding:15px 0px 0px 15px;vertical-align:top;"></td><td colspan=3D"1" row=
span=3D"1" style=3D"text-align:right;padding:15px 15px 0px 0px;vertical-ali=
gn:top;">
<div></div>
</td></tr></tbody></table></td></tr></tbody></table></td></tr><tr><td colsp=
an=3D"1" rowspan=3D"1"><table style=3D"background:rgb(255,255,255);width:10=
0%;max-width:400px;border-radius:0px 0px 2px 2px;border-top:1px solid rgb(2=
24,228,233);" cellspacing=3D"0" cellpadding=3D"0" border=3D"0" align=3D"cen=
ter"><tbody><tr><td colspan=3D"1" rowspan=3D"1" style=3D"background-color:r=
gb(255,255,255);padding:16px 0px 16px 12px;vertical-align:top;border-radius=
:0px 0px 0px 2px;"></td><td colspan=3D"1" rowspan=3D"1" style=3D"vertical-a=
lign:middle;padding:12px 24px 16px 12px;width:99%;font-family:YahooSans, He=
lvetica, Arial, sans-serif;border-radius:0px 0px 2px;"><h2 style=3D"font-si=
ze:14px;line-height:19px;margin:0px 0px 6px;font-family:YahooSans, Helvetic=
a, Arial, sans-serif;color:rgb(38,40,42);max-width:314px;">HC Pacific</h2>
<div style=3D"font-size:12px;line-height:16px;margin:0px;color:rgb(151,155,=
167);">Helical U-Joints from HC Pacific. Contact us for quantity discounts.=
</div>
</td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></tab=
le></a></div>
<div><br clear=3D"none">
</div>
<div><br clear=3D"none">
</div>
<div><br clear=3D"none">
</div>
<div>
<div dir=3D"ltr" style=3D"font-family:Helvetica, Arial, sans-serif;font-siz=
e:13px;">J. Patrick Bloem</div>
<div dir=3D"ltr" style=3D"font-family:Helvetica, Arial, sans-serif;font-siz=
e:13px;">9168 TR250</div>
<div dir=3D"ltr" style=3D"font-family:Helvetica, Arial, sans-serif;font-siz=
e:13px;">1973 TR6</div>
</div>
</div>
=20
<div><br clear=3D"none">
</div>
<div><br clear=3D"none">
</div>
=20
</div>
<div id=3D"yiv6209564168gmail-m_2866720244154362103yiv7648989835yahoo_quote=
d_8180727951">
=20
<div style=3D"font-family:Helvetica, Arial, sans-serif;font-size:13px;color=
:rgb(38,40,42);">
=20
=20
<div>
On Wednesday, November 24, 2021, 09:40:53 AM EST, <a re=
l=3D"nofollow noopener noreferrer" shape=3D"rect" ymailto=3D"mailto:6pack-r=
equest@autox.team.net" target=3D"_blank" href=3D"mailto:6pack-request@autox=
.team.net">6pack-request@autox.team.net</a> <<a rel=3D"nofollow noopener=
noreferrer" shape=3D"rect" ymailto=3D"mailto:6pack-request@autox.team.net"=
target=3D"_blank" href=3D"mailto:6pack-request@autox.team.net">6pack-reque=
st@autox.team.net</a>> wrote:
</div>
=20
<div><br clear=3D"none">
</div>
=20
<div><br clear=3D"none">
</div>
=20
<div>
<div dir=3D"ltr">Send 6pack mailing list submissions to<br clear=3D"none">
</div>
<div dir=3D"ltr"> <a rel=3D"nofollow noopener noreferrer"=
shape=3D"rect" ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" h=
ref=3D"mailto:6pack@autox.team.net">6pack@autox.team.net</a><br clear=3D"no=
ne">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">To subscribe or unsubscribe via the World Wide Web, visit<=
br clear=3D"none">
</div>
<div dir=3D"ltr"> <a rel=3D"nofollow noopener noreferrer"=
shape=3D"rect" target=3D"_blank" href=3D"http://autox.team.net/mailman/lis=
tinfo/6pack">http://autox.team.net/mailman/listinfo/6pack</a><br clear=3D"n=
one">
</div>
<div dir=3D"ltr">or, via email, send a message with subject or body 'help' =
to<br clear=3D"none">
</div>
<div dir=3D"ltr"> <a rel=3D"nofollow noopener noreferrer"=
shape=3D"rect" ymailto=3D"mailto:6pack-request@autox.team.net" target=3D"_=
blank" href=3D"mailto:6pack-request@autox.team.net">6pack-request@autox.tea=
m.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">You can reach the person managing the list at<br clear=3D"=
none">
</div>
<div dir=3D"ltr"> <a rel=3D"nofollow noopener noreferrer"=
shape=3D"rect" ymailto=3D"mailto:6pack-owner@autox.team.net" target=3D"_bl=
ank" href=3D"mailto:6pack-owner@autox.team.net">6pack-owner@autox.team.net<=
/a><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">When replying, please edit your Subject line so it is more=
specific<br clear=3D"none">
</div>
<div dir=3D"ltr">than "Re: Contents of 6pack digest..."<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Today's Topics:<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"> 1. Re: Throttle Linkage ?S? Connectors (Tomislav M=
arincic)<br clear=3D"none">
</div>
<div dir=3D"ltr"> 2. Re: Throttle Linkage ?S? Connectors (rmf3860 rm=
f3860)<br clear=3D"none">
</div>
<div dir=3D"ltr"> 3. Re: Throttle Linkage ?S? Connectors (Jim Jones)=
<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">----------------------------------------------------------=
------------<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Message: 1<br clear=3D"none">
</div>
<div dir=3D"ltr">Date: Wed, 24 Nov 2021 12:35:53 +0000<br clear=3D"none">
</div>
<div dir=3D"ltr">From: Tomislav Marincic <<a rel=3D"nofollow noopener no=
referrer" shape=3D"rect" ymailto=3D"mailto:tomislav.marincic@earthlink.net"=
target=3D"_blank" href=3D"mailto:tomislav.marincic@earthlink.net">tomislav=
.marincic@earthlink.net</a>><br clear=3D"none">
</div>
<div dir=3D"ltr">To: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect"=
ymailto=3D"mailto:robertrudolphi@yahoo.com" target=3D"_blank" href=3D"mail=
to:robertrudolphi@yahoo.com">robertrudolphi@yahoo.com</a>, <a rel=3D"nofoll=
ow noopener noreferrer" shape=3D"rect" ymailto=3D"mailto:6pack@autox.team.n=
et" target=3D"_blank" href=3D"mailto:6pack@autox.team.net">6pack@autox.team=
.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">Message-ID: <<a rel=3D"nofollow noopener noreferrer" sh=
ape=3D"rect" ymailto=3D"mailto:7018a786-b1bf-d48d-329c-a523ebe9a879@earthli=
nk.net" target=3D"_blank" href=3D"mailto:7018a786-b1bf-d48d-329c-a523ebe9a8=
79@earthlink.net">7018a786-b1bf-d48d-329c-a523ebe9a879@earthlink.net</a>>=
;<br clear=3D"none">
</div>
<div dir=3D"ltr">Content-Type: text/plain; charset=3Dutf-8<br clear=3D"none=
">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Hello Robert,<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I'll snap you a photo of the barrel linkage in place. One =
of them works, but if I recall correctly, there was no way to use two and g=
et them installed without removing the carbs?and linkage.<br clear=3D"none"=
>
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I Jet Hot coated both of my manifolds, and wrapped the exh=
aust header in Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds loo=
king nice, and keeps the header from corroding, but it won't cure your fuel=
cook-off problems. Your best bet is one of Joe Alexander's heat shields, w=
hich I think are being sold through Moss as well. <a rel=3D"nofollow noopen=
er noreferrer" shape=3D"rect" target=3D"_blank" href=3D"https://mossmotors.=
com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Df=
eed&utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobC=
hMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE">https://mossmotors.com/alum=
inum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&=
utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v715=
4Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE </a>(<a rel=3D"nofollow noopener nor=
eferrer" shape=3D"rect" target=3D"_blank" href=3D"https://mossmotors.com/al=
uminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&am=
p;utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7=
154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE">https://mossmotors.com/aluminum-h=
eat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_me=
dium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AI=
VhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE</a>)<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"https://www.summitracing.com/parts/the-11021?rrec=3D=
true">https://www.summitracing.com/parts/the-11021?rrec=3Dtrue </a>(<a rel=
=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_blank" href=3D"=
https://www.summitracing.com/parts/the-11021?rrec=3Dtrue">https://www.summi=
tracing.com/parts/the-11021?rrec=3Dtrue</a>)<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Good Luck, Tom<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">-----Original Message-----<br clear=3D"none">
</div>
<div dir=3D"ltr">From: robert rudolphi <br clear=3D"none">
</div>
<div dir=3D"ltr">Sent: Nov 23, 2021 1:23 PM<br clear=3D"none">
</div>
<div dir=3D"ltr">To: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect"=
ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6=
pack@autox.team.net">6pack@autox.team.net</a> , Tomislav Marincic <br clear=
=3D"none">
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">To follow up on this I am having my carbs rebuilt this win=
ter (Joe Curto) and was thinking about have the intake and stock exhaust ma=
nifolds Jet coated. I am trying to reduce hard starting when hot. Would als=
o like to get the throttle linkages re-plated/refinished and was wondering =
what is the best way to go?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Thanks in advance for any feedback<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Robert<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav M=
arincic wrote:<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">When I set up my dual ZS175?s I used new link clips from R=
oadster Factory. They quickly became distorted and introduced slop into the=
linkage.<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I?m currently using one SU link clip sourced from Richard =
Good, which is much sturdier and more rust-resistant than the ZS part. I?m =
also using a single rigid coupling that I sourced from Grainger. I forget w=
hy, but installing two shaft linkages was problematic, and the gap between =
carb throttle shafts was too wide to use two SU linkages.<br clear=3D"none"=
>
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I might have one of each in my spares if you need them.<br=
clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"https://www.grainger.com/search?searchQuery=3Dnomar+=
clx-5-5-a&searchBar=3Dtrue">https://www.grainger.com/search?searchQuery=
=3Dnomar+clx-5-5-a&searchBar=3Dtrue</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"https://www.goodparts.com/product/folded-coupler-car=
b-shaft/">https://www.goodparts.com/product/folded-coupler-carb-shaft/</a><=
br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Pix on request?Tom<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">_______________________________________________<br clear=
=3D"none">
</div>
<div dir=3D"ltr">Support Team.Net <a rel=3D"nofollow noopener noreferrer" s=
hape=3D"rect" target=3D"_blank" href=3D"http://www.team.net/donate.html">ht=
tp://www.team.net/donate.html</a><br clear=3D"none">
</div>
<div dir=3D"ltr">Suggested annual donation? $12.96<br clear=3D"none">
</div>
<div dir=3D"ltr">Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" target=3D"_blank" href=3D"http://www.team.net/archive">http://www.tea=
m.net/archive</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack=
@autox.team.net">6pack@autox.team.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/6pack">http:/=
/autox.team.net/mailman/listinfo/6pack</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Unsubscribe/Manage: <a rel=3D"nofollow noopener noreferrer=
" shape=3D"rect" target=3D"_blank" href=3D"http://autox.team.net/mailman/op=
tions/6pack/robertrudolphi@yahoo.com">http://autox.team.net/mailman/options=
/6pack/robertrudolphi@yahoo.com</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">------------------------------<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Message: 2<br clear=3D"none">
</div>
<div dir=3D"ltr">Date: Wed, 24 Nov 2021 07:49:10 -0600<br clear=3D"none">
</div>
<div dir=3D"ltr">From: rmf3860 rmf3860 <<a rel=3D"nofollow noopener nore=
ferrer" shape=3D"rect" ymailto=3D"mailto:bobfabie@gmail.com" target=3D"_bla=
nk" href=3D"mailto:bobfabie@gmail.com">bobfabie@gmail.com</a>><br clear=
=3D"none">
</div>
<div dir=3D"ltr">To: Tomislav Marincic <<a rel=3D"nofollow noopener nore=
ferrer" shape=3D"rect" ymailto=3D"mailto:tomislav.marincic@earthlink.net" t=
arget=3D"_blank" href=3D"mailto:tomislav.marincic@earthlink.net">tomislav.m=
arincic@earthlink.net</a>><br clear=3D"none">
</div>
<div dir=3D"ltr">Cc: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect"=
ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6=
pack@autox.team.net">6pack@autox.team.net</a>, <a rel=3D"nofollow noopener =
noreferrer" shape=3D"rect" ymailto=3D"mailto:robertrudolphi@yahoo.com" targ=
et=3D"_blank" href=3D"mailto:robertrudolphi@yahoo.com">robertrudolphi@yahoo=
.com</a><br clear=3D"none">
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">Message-ID:<br clear=3D"none">
</div>
<div dir=3D"ltr"> <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte=
_AfdEiMHbp=3D3=3D<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:pHg@mail.gmail.com" target=3D"_blank" href=3D"mailto:pHg@mai=
l.gmail.com">pHg@mail.gmail.com</a>><br clear=3D"none">
</div>
<div dir=3D"ltr">Content-Type: text/plain; charset=3D"utf-8"<br clear=3D"no=
ne">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Thanks Tom. I have a heat deflector. I bought it many year=
s ago.<br clear=3D"none">
</div>
<div dir=3D"ltr">Considering the slop in my throttle linkage, I decided to =
order a<br clear=3D"none">
</div>
<div dir=3D"ltr">replacement from Richard at Goodparts.<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Bob Fabie<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <<br =
clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:tomislav.marincic@earthlink.net" target=3D"_blank" href=3D"m=
ailto:tomislav.marincic@earthlink.net">tomislav.marincic@earthlink.net</a>&=
gt; wrote:<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">> Hello Robert,<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> I'll snap you a photo of the barrel linkage in place.=
One of them works,<br clear=3D"none">
</div>
<div dir=3D"ltr">> but if I recall correctly, there was no way to use tw=
o and get them<br clear=3D"none">
</div>
<div dir=3D"ltr">> installed without removing the carbs and linkage.<br =
clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> I Jet Hot coated both of my manifolds, and wrapped th=
e exhaust header in<br clear=3D"none">
</div>
<div dir=3D"ltr">> Thermo-Tec exhaust tape. The Jet Hot keeps the manifo=
lds looking nice, and<br clear=3D"none">
</div>
<div dir=3D"ltr">> keeps the header from corroding, but it won't cure yo=
ur fuel cook-off<br clear=3D"none">
</div>
<div dir=3D"ltr">> problems. Your best bet is one of Joe Alexander's hea=
t shields, which I<br clear=3D"none">
</div>
<div dir=3D"ltr">> think are being sold through Moss as well.<br clear=
=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://mossmotors.com/aluminum-heat-shield-by-=
a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&am=
p;utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8E=
AQYAiABEgKXSPD_BwE">https://mossmotors.com/aluminum-heat-shield-by-a-r-e-fo=
r-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_ca=
mpaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABE=
gKXSPD_BwE</a><br clear=3D"none">
</div>
<div dir=3D"ltr">> (<br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://mossmotors.com/aluminum-heat-shield-by-=
a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&am=
p;utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8E=
AQYAiABEgKXSPD_BwE">https://mossmotors.com/aluminum-heat-shield-by-a-r-e-fo=
r-zenith-stromberg-carbs?utm_source=3Dfeed&utm_medium=3Dfree&utm_ca=
mpaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABE=
gKXSPD_BwE</a><br clear=3D"none">
</div>
<div dir=3D"ltr">> )<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://www.summitracing.com/parts/the-11021?rr=
ec=3Dtrue">https://www.summitracing.com/parts/the-11021?rrec=3Dtrue </a>(<b=
r clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://www.summitracing.com/parts/the-11021?rr=
ec=3Dtrue">https://www.summitracing.com/parts/the-11021?rrec=3Dtrue</a>)<br=
clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> Good Luck, Tom<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> -----Original Message-----<br clear=3D"none">
</div>
<div dir=3D"ltr">> From: robert rudolphi<br clear=3D"none">
</div>
<div dir=3D"ltr">> Sent: Nov 23, 2021 1:23 PM<br clear=3D"none">
</div>
<div dir=3D"ltr">> To: <a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mai=
lto:6pack@autox.team.net">6pack@autox.team.net</a> , Tomislav Marincic<br c=
lear=3D"none">
</div>
<div dir=3D"ltr">> Subject: Re: [6pack] Throttle Linkage ?S? Connectors<=
br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> To follow up on this I am having my carbs rebuilt thi=
s winter (Joe Curto)<br clear=3D"none">
</div>
<div dir=3D"ltr">> and was thinking about have the intake and stock exha=
ust manifolds Jet<br clear=3D"none">
</div>
<div dir=3D"ltr">> coated. I am trying to reduce hard starting when hot.=
Would also like to<br clear=3D"none">
</div>
<div dir=3D"ltr">> get the throttle linkages re-plated/refinished and wa=
s wondering what is<br clear=3D"none">
</div>
<div dir=3D"ltr">> the best way to go?<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> Thanks in advance for any feedback<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> Robert<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomis=
lav Marincic wrote:<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> When I set up my dual ZS175?s I used new link clips f=
rom Roadster Factory.<br clear=3D"none">
</div>
<div dir=3D"ltr">> They quickly became distorted and introduced slop int=
o the linkage.<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> I?m currently using one SU link clip sourced from Ric=
hard Good, which is<br clear=3D"none">
</div>
<div dir=3D"ltr">> much sturdier and more rust-resistant than the ZS par=
t. I?m also using a<br clear=3D"none">
</div>
<div dir=3D"ltr">> single rigid coupling that I sourced from Grainger. I=
forget why, but<br clear=3D"none">
</div>
<div dir=3D"ltr">> installing two shaft linkages was problematic, and th=
e gap between carb<br clear=3D"none">
</div>
<div dir=3D"ltr">> throttle shafts was too wide to use two SU linkages.<=
br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> I might have one of each in my spares if you need the=
m.<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://www.grainger.com/search?searchQuery=3Dn=
omar+clx-5-5-a&searchBar=3Dtrue">https://www.grainger.com/search?search=
Query=3Dnomar+clx-5-5-a&searchBar=3Dtrue</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"https://www.goodparts.com/product/folded-couple=
r-carb-shaft/">https://www.goodparts.com/product/folded-coupler-carb-shaft/=
</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> Pix on request?Tom<br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> _______________________________________________<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">> Support Team.Net <a rel=3D"nofollow noopener noreferr=
er" shape=3D"rect" target=3D"_blank" href=3D"http://www.team.net/donate.htm=
l">http://www.team.net/donate.html</a><br clear=3D"none">
</div>
<div dir=3D"ltr">> Suggested annual donation $12.96<br clear=3D"no=
ne">
</div>
<div dir=3D"ltr">> Archive: <a rel=3D"nofollow noopener noreferrer" shap=
e=3D"rect" target=3D"_blank" href=3D"http://www.team.net/archive">http://ww=
w.team.net/archive</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:=
6pack@autox.team.net">6pack@autox.team.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/6pack">h=
ttp://autox.team.net/mailman/listinfo/6pack</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> Unsubscribe/Manage:<br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"http://autox.team.net/mailman/options/6pack/rob=
ertrudolphi@yahoo.com">http://autox.team.net/mailman/options/6pack/robertru=
dolphi@yahoo.com</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> _______________________________________________<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">> Support Team.Net <a rel=3D"nofollow noopener noreferr=
er" shape=3D"rect" target=3D"_blank" href=3D"http://www.team.net/donate.htm=
l">http://www.team.net/donate.html</a><br clear=3D"none">
</div>
<div dir=3D"ltr">> Suggested annual donation $12.96<br clear=3D"no=
ne">
</div>
<div dir=3D"ltr">> Archive: <a rel=3D"nofollow noopener noreferrer" shap=
e=3D"rect" target=3D"_blank" href=3D"http://www.team.net/archive">http://ww=
w.team.net/archive</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:=
6pack@autox.team.net">6pack@autox.team.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/6pack">h=
ttp://autox.team.net/mailman/listinfo/6pack</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">> Unsubscribe/Manage:<br clear=3D"none">
</div>
<div dir=3D"ltr">> <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"http://autox.team.net/mailman/options/6pack/bob=
fabie@gmail.com">http://autox.team.net/mailman/options/6pack/bobfabie@gmail=
.com</a><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">><br clear=3D"none">
</div>
<div dir=3D"ltr">-------------- next part --------------<br clear=3D"none">
</div>
<div dir=3D"ltr">An HTML attachment was scrubbed...<br clear=3D"none">
</div>
<div dir=3D"ltr">URL: <<a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" target=3D"_blank" href=3D"http://autox.team.net/pipermail/6pack/attac=
hments/20211124/ed838233/attachment-0001.htm">http://autox.team.net/piperma=
il/6pack/attachments/20211124/ed838233/attachment-0001.htm</a>><br clear=
=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">------------------------------<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Message: 3<br clear=3D"none">
</div>
<div dir=3D"ltr">Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)<br clear=3D"no=
ne">
</div>
<div dir=3D"ltr">From: Jim Jones <<a rel=3D"nofollow noopener noreferrer=
" shape=3D"rect" ymailto=3D"mailto:jimjcmo@yahoo.com" target=3D"_blank" hre=
f=3D"mailto:jimjcmo@yahoo.com">jimjcmo@yahoo.com</a>><br clear=3D"none">
</div>
<div dir=3D"ltr">To: Tomislav Marincic <<a rel=3D"nofollow noopener nore=
ferrer" shape=3D"rect" ymailto=3D"mailto:tomislav.marincic@earthlink.net" t=
arget=3D"_blank" href=3D"mailto:tomislav.marincic@earthlink.net">tomislav.m=
arincic@earthlink.net</a>>,<br clear=3D"none">
</div>
<div dir=3D"ltr"> <<a rel=3D"nofollow noopener norefer=
rer" shape=3D"rect" ymailto=3D"mailto:robertrudolphi@yahoo.com" target=3D"_=
blank" href=3D"mailto:robertrudolphi@yahoo.com">robertrudolphi@yahoo.com</a=
>>, <<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack=
@autox.team.net">6pack@autox.team.net</a>><br clear=3D"none">
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">Message-ID: <<a rel=3D"nofollow noopener noreferrer" sh=
ape=3D"rect" ymailto=3D"mailto:385333468.2961619.1637764790031@mail.yahoo.c=
om" target=3D"_blank" href=3D"mailto:385333468.2961619.1637764790031@mail.y=
ahoo.com">385333468.2961619.1637764790031@mail.yahoo.com</a>><br clear=
=3D"none">
</div>
<div dir=3D"ltr">Content-Type: text/plain; charset=3D"utf-8"<br clear=3D"no=
ne">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">I have a new exhaust shield available if anyone would want=
it. Email me for price if you?re interested.<br clear=3D"none">
</div>
<div dir=3D"ltr">Jim JonesFormer ?72 6 owner<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Sent from Yahoo Mail for iPad<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marinci=
c <<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" ymailto=3D"mai=
lto:tomislav.marincic@earthlink.net" target=3D"_blank" href=3D"mailto:tomis=
lav.marincic@earthlink.net">tomislav.marincic@earthlink.net</a>> wrote:<=
br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Hello Robert,<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I'll snap you a photo of the barrel linkage in place. One =
of them works, but if I recall correctly, there was no way to use two and g=
et them installed without removing the carbs?and linkage.<br clear=3D"none"=
>
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I Jet Hot coated both of my manifolds, and wrapped the exh=
aust header in Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds loo=
king nice, and keeps the header from corroding, but it won't cure your fuel=
cook-off problems. Your best bet is one of Joe Alexander's heat shields, w=
hich I think are being sold through Moss as well. <a rel=3D"nofollow noopen=
er noreferrer" shape=3D"rect" target=3D"_blank" href=3D"https://mossmotors.=
com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Df=
eed&utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobC=
hMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE">https://mossmotors.com/alum=
inum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&=
utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v715=
4Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE </a>(<a rel=3D"nofollow noopener nor=
eferrer" shape=3D"rect" target=3D"_blank" href=3D"https://mossmotors.com/al=
uminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&am=
p;utm_medium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7=
154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE">https://mossmotors.com/aluminum-h=
eat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=3Dfeed&utm_me=
dium=3Dfree&utm_campaign=3Dshopping&gclid=3DEAIaIQobChMI4v7154Cx9AI=
VhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE</a>)<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"https://www.summitracing.com/parts/the-11021?rrec=3D=
true">https://www.summitracing.com/parts/the-11021?rrec=3Dtrue </a>(<a rel=
=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_blank" href=3D"=
https://www.summitracing.com/parts/the-11021?rrec=3Dtrue">https://www.summi=
tracing.com/parts/the-11021?rrec=3Dtrue</a>)<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Good Luck, Tom<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">-----Original Message-----<br clear=3D"none">
</div>
<div dir=3D"ltr">From: robert rudolphi <br clear=3D"none">
</div>
<div dir=3D"ltr">Sent: Nov 23, 2021 1:23 PM<br clear=3D"none">
</div>
<div dir=3D"ltr">To: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect"=
ymailto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6=
pack@autox.team.net">6pack@autox.team.net</a> , Tomislav Marincic <br clear=
=3D"none">
</div>
<div dir=3D"ltr">Subject: Re: [6pack] Throttle Linkage ?S? Connectors<br cl=
ear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">To follow up on this I am having my carbs rebuilt this win=
ter (Joe Curto) and was thinking about have the intake and stock exhaust ma=
nifolds Jet coated. I am trying to reduce hard starting when hot. Would als=
o like to get the throttle linkages re-plated/refinished and was wondering =
what is the best way to go?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Thanks in advance for any feedback<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Robert<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav M=
arincic wrote:<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">When I set up my dual ZS175?s I used new link clips from R=
oadster Factory. They quickly became distorted and introduced slop into the=
linkage.<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I?m currently using one SU link clip sourced from Richard =
Good, which is much sturdier and more rust-resistant than the ZS part. I?m =
also using a single rigid coupling that I sourced from Grainger. I forget w=
hy, but installing two shaft linkages was problematic, and the gap between =
carb throttle shafts was too wide to use two SU linkages.<br clear=3D"none"=
>
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">I might have one of each in my spares if you need them.<br=
clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"https://www.grainger.com/search?searchQuery=3Dnomar+=
clx-5-5-a&searchBar=3Dtrue">https://www.grainger.com/search?searchQuery=
=3Dnomar+clx-5-5-a&searchBar=3Dtrue</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"https://www.goodparts.com/product/folded-coupler-car=
b-shaft/">https://www.goodparts.com/product/folded-coupler-carb-shaft/</a><=
br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Pix on request?Tom<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">_______________________________________________<br clear=
=3D"none">
</div>
<div dir=3D"ltr">Support Team.Net <a rel=3D"nofollow noopener noreferrer" s=
hape=3D"rect" target=3D"_blank" href=3D"http://www.team.net/donate.html">ht=
tp://www.team.net/donate.html</a><br clear=3D"none">
</div>
<div dir=3D"ltr">Suggested annual donation? $12.96<br clear=3D"none">
</div>
<div dir=3D"ltr">Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" target=3D"_blank" href=3D"http://www.team.net/archive">http://www.tea=
m.net/archive</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack=
@autox.team.net">6pack@autox.team.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/6pack">http:/=
/autox.team.net/mailman/listinfo/6pack</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">Unsubscribe/Manage: <a rel=3D"nofollow noopener noreferrer=
" shape=3D"rect" target=3D"_blank" href=3D"http://autox.team.net/mailman/op=
tions/6pack/robertrudolphi@yahoo.com">http://autox.team.net/mailman/options=
/6pack/robertrudolphi@yahoo.com</a><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">?<br clear=3D"none">
</div>
<div dir=3D"ltr">_______________________________________________<br clear=
=3D"none">
</div>
<div dir=3D"ltr">Support Team.Net <a rel=3D"nofollow noopener noreferrer" s=
hape=3D"rect" target=3D"_blank" href=3D"http://www.team.net/donate.html">ht=
tp://www.team.net/donate.html</a><br clear=3D"none">
</div>
<div dir=3D"ltr">Suggested annual donation? $12.96<br clear=3D"none">
</div>
<div dir=3D"ltr">Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" target=3D"_blank" href=3D"http://www.team.net/archive">http://www.tea=
m.net/archive</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack=
@autox.team.net">6pack@autox.team.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/6pack">http:/=
/autox.team.net/mailman/listinfo/6pack</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Unsubscribe/Manage: <a rel=3D"nofollow noopener noreferrer=
" shape=3D"rect" target=3D"_blank" href=3D"http://autox.team.net/mailman/op=
tions/6pack/jimjcmo@yahoo.com">http://autox.team.net/mailman/options/6pack/=
jimjcmo@yahoo.com</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">-------------- next part --------------<br clear=3D"none">
</div>
<div dir=3D"ltr">An HTML attachment was scrubbed...<br clear=3D"none">
</div>
<div dir=3D"ltr">URL: <<a rel=3D"nofollow noopener noreferrer" shape=3D"=
rect" target=3D"_blank" href=3D"http://autox.team.net/pipermail/6pack/attac=
hments/20211124/4fa9bbf6/attachment.htm">http://autox.team.net/pipermail/6p=
ack/attachments/20211124/4fa9bbf6/attachment.htm</a>><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">------------------------------<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">Subject: Digest Footer<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">_______________________________________________<br clear=
=3D"none">
</div>
<div dir=3D"ltr">6pack mailing list<br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" yma=
ilto=3D"mailto:6pack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack=
@autox.team.net">6pack@autox.team.net</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" tar=
get=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/6pack">http:/=
/autox.team.net/mailman/listinfo/6pack</a><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">------------------------------<br clear=3D"none">
</div>
<div dir=3D"ltr"><br clear=3D"none">
</div>
<div dir=3D"ltr">End of 6pack Digest, Vol 81, Issue 7<br clear=3D"none">
</div>
<div dir=3D"ltr">************************************<br clear=3D"none">
</div>
</div>
</div>
</div>
</div>
</div>
_______________________________________________<br clear=3D"none">
get=3D"_blank" href=3D"http://www.team.net/donate.html">http://www.team.net=
/donate.html</a><br clear=3D"none">
Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_=
blank" href=3D"http://www.team.net/archive">http://www.team.net/archive</a>=
<br clear=3D"none">
<br clear=3D"none">
<br clear=3D"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" ymailto=3D"mailto:6p=
ack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack@autox.team.net">=
6pack@autox.team.net</a><br clear=3D"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_blank" hr=
ef=3D"http://autox.team.net/mailman/listinfo/6pack">http://autox.team.net/m=
ailman/listinfo/6pack</a><br clear=3D"none">
<br clear=3D"none">
target=3D"_blank" href=3D"http://autox.team.net/mailman/options/6pack/dave1=
massey@cs.com">http://autox.team.net/mailman/options/6pack/dave1massey@cs.c=
om</a><br clear=3D"none">
<br clear=3D"none">
</div>
</div>
_______________________________________________<br clear=3D"none">
get=3D"_blank" href=3D"http://www.team.net/donate.html">http://www.team.net=
/donate.html</a><br clear=3D"none">
Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_=
blank" href=3D"http://www.team.net/archive">http://www.team.net/archive</a>=
<br clear=3D"none">
<br clear=3D"none">
<br clear=3D"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" ymailto=3D"mailto:6p=
ack@autox.team.net" target=3D"_blank" href=3D"mailto:6pack@autox.team.net">=
6pack@autox.team.net</a><br clear=3D"none">
<a rel=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_blank" hr=
ef=3D"http://autox.team.net/mailman/listinfo/6pack">http://autox.team.net/m=
ailman/listinfo/6pack</a><br clear=3D"none">
<br clear=3D"none">
target=3D"_blank" href=3D"http://autox.team.net/mailman/options/6pack/forzi=
on7@gmail.com">http://autox.team.net/mailman/options/6pack/forzion7@gmail.c=
om</a><br clear=3D"none">
<br clear=3D"none">
</blockquote></div>
</div>
</div>
</div>
</font></div>
</div>
------=_Part_1010942_732646363.1637778875753--
--===============7019024152922148782==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
--===============7019024152922148782==--
|