6pack
[Top] [All Lists]

Re: [6pack] Trafficator Clip

To: <lfm614@aol.com>, "TR-6 list" <6pack@autox.team.net>
Subject: Re: [6pack] Trafficator Clip
From: "Jeff Fetner" <FETNERJ001@hawaii.rr.com>
Date: Wed, 30 Oct 2013 16:57:14 -1000
Delivered-to: mharc@autox.team.net
Delivered-to: 6pack@autox.team.net
References: <CAJ1eQwhnqGRrOfPMLWHB2KyJDp7jWpvHDLR4zQ0Uf-rRmbrJag@mail.gmail.com><902583668-1383163571-cardhu_blackberry.rim.net-copy_sent_folder-180347495-@b13.c20.bise6.blackberry> <1386022950-1383172655-cardhu_decombobulator_blackberry.rim.net-491612595-@b13.c20.bise6.blackberry>
  And I think there are 'pips' on the clip so it will only fit on the upper 
column in one position (well, two, since I think it could be put on 180 
degrees to the other side).
Just like Lou says, everything has to be lined up for straight ahead and the 
clip sitting at 9 O'clock.  After wheels straight ahead, I had to align the 
shaft via the splines at the box to get the clip bump at 9.  Then got the 
steering wheel spokes in a "T" alignment separately.

Jeff
74 TR6

-----Original Message----- 
From: lfm614@aol.com
Sent: Wednesday, October 30, 2013 12:37 PM
To: TR-6 list
Subject: Re: [6pack] Trafficator Clip

-----Original Message-----
From: lfm614@aol.com
Date: Wed, 30 Oct 2013 20:06:11
To: David Friedlander<forzion7@gmail.com>
Subject: Re: [6pack] Trafficator Clip

9oclock.

To do this you will have the wheels straight then disconnect the steering 
shaft at the box and line it up correctly using the splines and steering 
wheel in the proper orientation.

Be sure to push the switch in to make good contact with the clip humps 
before tightening the screws.

Lou
72 Pimento
-----Original Message-----
From: David Friedlander <forzion7@gmail.com>
Date: Wed, 30 Oct 2013 15:35:47
To: 6-Pack<6pack@autox.team.net>
Subject: [6pack] Trafficator Clip

Hey team!

I have never quite had my turn signals cancel correctly and it occurs to me
I need to
adjust the position of the trafficator clip on my upper steering column,
just below
the horn ring. Can someone tell me the proper position of the detent "hump"
on the
trafficator clip should be?? Rifht now, mine is at about the 10 o'clock
position and
that's not right. Any help appreciated. Bentley's is not clear on the
subject).

Thanks any and all!!

Dave Friedlander
'74 Six

________________________________________

6pack@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/6pack/lfm614@aol.com

________________________________________

6pack@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/6pack/fetnerj001@hawaii.rr.com

________________________________________

6pack@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/6pack/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>