The door pulls sound like the type off of the TR4 and TR5/250. I bought a set
for a different non TR car project. The PO may have added them.
JohnB
Chicago
74 TR6
--- On Sat, 10/11/08, michael lunsford <mblunsfordsr@yahoo.com> wrote:
> From: michael lunsford <mblunsfordsr@yahoo.com>
> Subject: [6pack] Door Pulls and Stuck Float
> To: 6pack@autox.team.net
> Date: Saturday, October 11, 2008, 3:10 PM
> The only door pulls on the 1970 TR 6 were the ones moulded
> into the top of the
> door in the center next to the window. The later cars had
> the pulls recessed
> into the center of the doors which is a better location
> than on our 1970
> models. I don't know what year the change from the top
> to the center of the
> door but it was after my car was built in mid 1970.
>
> In regard to the stuck float. If the measures you have
> tried don't work you
> need to take the carb off and remove the float bowl. You
> can then remove the
> float and check to see if it has any fuel inside either
> side of the float
> which could be the cause of your problem. After that you
> should remove
> the needle valve, blow out the orfice with air and check
> for obstructions. I
> don't see how the charcoal canister could cause the
> carb to overflow.
>
> Mike Lunsford, 1970 TR 6 TBI. 1969 TR6-for sale
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You are subscribed as jb_2email@yahoo.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|