The only door pulls on the 1970 TR 6 were the ones moulded into the top of the
door in the center next to the window. The later cars had the pulls recessed
into the center of the doors which is a better location than on our 1970
models. I don't know what year the change from the top to the center of the
door but it was after my car was built in mid 1970.
In regard to the stuck float. If the measures you have tried don't work you
need to take the carb off and remove the float bowl. You can then remove the
float and check to see if it has any fuel inside either side of the float
which could be the cause of your problem. After that you should remove
the needle valve, blow out the orfice with air and check for obstructions. I
don't see how the charcoal canister could cause the carb to overflow.
Mike Lunsford, 1970 TR 6 TBI. 1969 TR6-for sale
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|