I used a TR4 single choke cable on the rear carb as my SUs had linkage
connecting the chokes together.
Be careful with those carbs. The rear float bowl is different (offset
higher?) for the 2000 as the motor is canted. The rear bowl should be
the same as the front on the TR6 or you won't be able to get the level
and mixture correct -
Dale O
'76 TR6
Message: 5
Date: Wed, 25 Jun 2008 21:55:57 -0700 (PDT)
From: Bruce Simms <brucesimms2003@yahoo.ca>
Subject: [6pack] Choke Cables for SU HS6 Conversion?
To: 6pack@autox.team.net
Message-ID: <731490.3531.qm@web65604.mail.ac4.yahoo.com>
Content-Type: text/plain; charset="us-ascii"
The original ZS choke cables seem too short for the HS6s I now have on
my
73. What have other foks done?
Would a set of choke cables from a TR7 work?
Didn't some TR7s use SUs?
The English ebayer said my SUs were off a Triumph
2000, if memory serves, but I don't really know. Carb ID #s were
quite
different. Rebuilt the carbs anyways. I didn't pay that much for
them.
They
didn't come with choke cables.
Thank you,
Bruce Simms
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|