6pack
[Top] [All Lists]

Re: [6pack] sealing a Cast Valve Cover

To: Craig <wensley_Tr@comcast.net>
Subject: Re: [6pack] sealing a Cast Valve Cover
From: "Scott Tilton" <triumph.tr4@gmail.com>
Date: Fri, 6 Jun 2008 16:48:16 -0400
On the contrary - I've actually been pretty busy and productive at work
today.  (yes . . . on work related projects)

Don't mistake a lengthy e-mail for a lot of time spent at the computer.
Helps when you can type just about as fast as you can think what you want to
say. . . .  (which doens't make for well written e-mails.  It just means
they take very little time to compose.)

On Fri, Jun 6, 2008 at 4:23 PM, Craig <wensley_Tr@comcast.net> wrote:

> Boy you can tell some one is not working
>
>
> ----- Original Message ----- From: "Scott Tilton" <triumph.tr4@gmail.com>
> To: "6pack" <6pack@autox.team.net>
> Sent: Friday, June 06, 2008 3:19 PM
> Subject: Re: [6pack] sealing a Cast Valve Cover
>
>
>   Never really knew how many off list replies these e-mails get until I
>> actually started posting questions to the list.
>>
>> Let's see - How to answer / reply to people - as I have gotten multiples
>> of
>> the same comments:
>>
>> I just got a cast valve cover- haven't installed it yet.
>> So I'm actually NOT having any troubles as of yet.
>> I just saw the fat / flat bottom flange and thought there was room in
>> there
>> for milling a groove for an o-ring cord.
>> It was just a thought.
>>
>> I'm told that some people have done that.
>> I'm also told that some already come like that.  (really?)
>>
>> I had thought about milling a groove in a head in the past - but never
>> really had the opportunity to do it.
>> Seems to me it'd be easier to mill one in the head - if not for the simple
>> reason that it'd be easier to mount the thing on machine.
>> Also - you usually need to take your head to a machine shop sooner or
>> later
>> anyway.
>>
>> Why would I do it?  Why use Oring cord in a groove?
>> Probably the same reason they do it that way on modern cars instead of
>> using
>> cork gaskets.
>> It's a more robust solution to the issue.  Reusable and fool proof (and
>> I'm
>> a fool obviously)
>>
>> Obviously I'm not following the "if it ain't broke, then don't fix it. .
>> ."  school of thought.
>> Not broken?  Heck - I haven't even tried it out.
>>
>> Sometimes I just can't leave well enough alone.  (see fool reference from
>> earlier)
>>
>> Lastly - had a couple of comments about roller rockers.  It was my
>> understanding that for the TR6 - the roller rockers will fit under the
>> stock
>> cover.   (not so for the TR3/4)  Is that not true?
>>
>> Thanks for all the replies - I enjoy them.
>>
>> Scott
>> _______________________________________________
>>
>> Support Team.Net  http://www.team.net/donate.html
>>
>> 6pack@autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> http://www.team.net/archive
>>
>> You are subscribed as wensley_tr@comcast.net
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>