Have you checked the fit of the cable into the square drive in the speedo for
looseness and the proper engagement length?
Sometimes the cable doesn't go in all the way and spins in the drive reciever.
This would cause the symptoms you describe.
Lou
-----Original Message-----
From: Jim Jones <jimjcmo@yahoo.com>
Date: Mon, 3 Mar 2008 15:45:32
To:6pack@autox.team.net
Subject: [6pack] speedo opinions
My speedometer is making a lot of noise (RMM-RMM-RMM) and the needle bounces
around a 180 degree arc. I've lubed the cable so it turns freely. It was new
one year ago. When I test the speedo using my adjustable speed drill it's quite
silent. I've also tested it by having the drill turn the cable shaft on the
dizzy end. It's quiet too.
What in blazes am it missing here?!
Jim
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|