John,
Somewhere I saw that you could thread the bushing and pull it out
with a bolt. This was most likely Nelson's work, but I don't recall
offhand...
Jay
On Sep 30, 2007, at 7:12 PM, John VanNorman wrote:
> Does anyone know of a good way to pull out the brass sleeve for the
> float chamber vent valve on the later style carbs? The valve is
> sticking on one of the carbs (more accurately, doesn't want to push
> back out when the throttle moves off idle) and I'd like to pull the
> valve components out to check them out, but I don't want to destroy
> the brass sleeve.
>
> John V.
|