6pack
[Top] [All Lists]

FW: [6pack] Early TR6 door vs. Late TR6 door.

To: <6pack@autox.team.net>
Subject: FW: [6pack] Early TR6 door vs. Late TR6 door.
From: "Navarrette, Vance" <vance.navarrette@intel.com>
Date: Thu, 9 Aug 2007 10:32:15 -0700
        Bob:

        Yes, you can do that. BUT why bother? A used door is cheap. Get
one from the proper year and drop it in. The later doors also have the
side impact beams, that give you additional collision strength and
protection.
        OK, so it really isn't that much protection, given the odds are
that you will t-boned by a GMC Denali and squashed like a cockroach. But
if you have the door beam, your family would PROBABLY be able to
identify your remains without resorting to dental records.

        =:-o

        Vance

-----Original Message-----
From: owner-6pack@Autox.Team.Net [mailto:owner-6pack@Autox.Team.Net] On
Behalf Of TRsick@aol.com
Sent: August 09, 2007 10:00 AM
To: 6pack@autox.team.net; tr@autox.team.net
Subject: [6pack] Early TR6 door vs. Late TR6 door.

Hi all:
    I have a 76 TR6. Someone backed into the pass side  fender & door. I
have
an early parts car that has a very clean door. The  outside is the same,
but
the early door has a molded door "pull" on the top  of the door & my 76
has
the door "pull" on the middle of the door  panel.
    Since my later door is trash. Can I cut the center  pull brackets
from
the late door & weld in the correct place at center for  the early door?
    Any one BTDT?
    Bob
_www.capecodpowdercoating.com_ (http://www.capecodpowdercoating.com)
_www.capecodbritishcarclub.org_ (http://www.capecodbritishcarclub.org)




<Prev in Thread] Current Thread [Next in Thread>