Re: Flywheel / starter realtionship

[Ed Bratt <bratt@sasktel.net>]

Lou:

The ring gear should fit flush against the flange on the flywheel.

I had a similar problem with a ring gear on an MG.  I took the flywheel to a
friend with a O2/acetelene welding set, and while he heated the ring gear,
and I tapped it into place using a brass drift and a hammer.

Ed

----- Original Message -----
From: <Lfm614@aol.com>
To: <6pack@autox.team.net>
Sent: Saturday, February 10, 2007 3:06 PM
Subject: Flywheel / starter realtionship