Marcus---Apparantly some of the writers at Moss do not know that the TR6
does not benefit from an SC adjustable pushrod. Greg Perry tells it
right.
One think you can check, is to make certain that there is very little
free play down in the pedal box. If you have less than 1/2 inch of
pushrod travel at the SC, removing play in the clutch pedal linkage (in
the box) will increase the amount of fluid sent to the SC.
Dick
From:
marcus@schaper.com(Marcus Schaper)
Dear all,
A quick question: I want to reduce the free travel in my clutch and move
the pressure point somewhat away from the floorboard. I should probably
pull the trans and make sure everything is in oder, but I don't have the
time to do that right now (I have bled the clutch and helped somewhat,
but I am still not happy). Moss has an adjustable clutch pushrod for $44
(http://mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=47698). This
would do the trick, but I was looking for a CHEAP quickfix ... Are there
less expensive alternative out there (like longer fixed length pushrods
or pushrod extensions)? Does anyone have one of these adjustable rods
who does not need it anymore and would sell it to me?
Thanks,
Marcus
|